FEATURES OF THE G11 Integrated pedal board with dedicated amp modeling panel, five stomp switches and expression/volume Control Touchscreen interface on color LCD with drag and swipe functions for easy and fast navigation Chain up to nine effects plus an amplifier emulation Original amp modeling combinations Original distortion and modulation effects 70 built in IR emulations plus 130 available slots for user uploaded IR's Two send/return effects loop plus MIDI in/out 5-minute stereo looper 68 built-in rhythm patterns USB audio interface for direct recording to your DAW Remote iOS connection for using Handy Guitar Lab via Bluetooth adapter (BTA-1) Compatible with Zoom Guitar Lab to download additional effects SPECS MAXIMUM NUMBER OF SIMULTANEOUS EFFECTS : Amplifier + 9 effects USER PATCHES : 240 SAMPLING FREQUENCY: 44.1 kHz A/D CONVERSION: 24-bit 128× oversampling D/A CONVERSION: 24-bit 128× oversampling SIGNAL PROCESSING: 32-bit FREQUENCY CHARACTERISTICS: 20 Hz – 20 kHz (+1 dB/−2 dB) (10kΩ load) DISPLAYS: 5" TFT color LCD (800×480) Dot-matrix LCDs (128×32) (6) INPUTS INPUT: Standard mono phone jack Rated input level: -20 dBuInput impedance (line): 500 kΩ RETURN: Standard mono phone jacks (2) Rated input level: -20 dBuInput impedance (line): 1 MΩ AUX IN: Stereo mini jack Rated input level: -10 dBuInput impedance (line): 10 kΩ OUTPUTS LEFT/RIGHT: Standard mono phone jack Maximum output level:INST/LINE +11.4 dBu/+19 dBu (when output impedance 10 kΩ or higher) PHONES: Standard stereo phone jack Maximum output level:Line +11.4 dBu (when output impedance 10 kΩ or higher)Headphones 24 mW + 24 mW (at 32Ω load) SEND: Standard mono phone jacks (2) Maximum output level:Line +11.4 dBu (when output impedance 10 kΩ or higher) INPUT S/N : 123 dB NOISE FLOOR (RESIDUAL NOISE): Left/Right : INST/LINE −99.5 dBu/−92.5 dBuSEND: -99.0 dBu MIDI IN/OUT: 5-pin DIN jacks CONTROL INPUT: FP02M input USB DEVICE: Connector: USB2.0 Type-C / Supported cable: Type-C cable GuitarLab: USB1.1 Full SpeedAudio Interface: USB2.0 High Speed, 44.1 kHz/32-bit 4in 4out• Use cables for data transfer. USB bus power not supported. USB HOST: Connector: USB2.0 Type-A / Standard: USB 2.0 High Speed • Use a USB thumb drive. REMOTE: ZOOM BTA-1 or other dedicated wireless adapter EXTERNAL DIMENSIONS: 253 mm (D) × 495 mm (W) × 64 mm (H) WEIGHT: 2.8 kg
