Part No. Thread Size,UNC-2A Shank Length (inches) I.D. Eye(inches) O.D. Eye(inches) Overall Length (inches) Net Weight (lbs.) Working Load Limit (lbs.) 88708 1/4 - 20 1 3/4 1-3/16 2-3/8 0.04 650 88710 5/16 - 18 1-1/8 7/8 1-7/16 2-13/16 0.09 1,200 88712 3/8 - 16 1-1/4 1 1-11/16 3-9/32 0.17 1,550 88714 7/16 -14 1-3/8 1-1/16 1-13/16 3-9/16 0.24 2,000 88716 1/2 - 13 1-1/2 1-3/16 2-1/8 3-31/32 0.38 2,600 88718 9/16 - 12 1-5/8 1-1/4 2-5/16 4--1/2 0.51 3,200 88720 5/8 - 11 1-3/4 1-3/8 2-9/16 4-3/4 0.71 5,200 88724 3/4 - 10 2 1-1/2 2-13/16 5-1/4 0.99 7,200 88728 7/8 - 9 2-1/4 1-11/16 3-3/16 5-31/32 1.48 10,600 88740 1-1/4 - 7 3 2-3/16 4-7/16 8-7/32 4.40 21,000 Note: Rated capacity is for 0º vertical pulls. Never apply loads greater than Rated Capacity to any eyebolt. Forged from bar quality fine grain C1030 / C1035 steel bar. Safety Warnings: Rated capacity limit is drastically reduced when loading at any angle. Loading must never be made at an angle greater than 45 degrees from bolt centerline. At an angle up to 45 degrees rated capacity is reduced to of the tabulated value. Direction of Pull Rated Capacity: 0 degrees 100% of rated capacity, 1 - 15 degrees 80% of rated capacity, 16 - 30 degrees 65% of rated capacity, 31 - 45 degrees 30% of rated capacity, 46+ degrees is not recommended. Never apply loads greater than Rated Capacity to any eyebolt. Always use a shoulder eye bolt when performing angular lifts. Angular lifting using plain pattern eye bolts is not recommended. Proof tested in accordance with ASTM A489 and Federal Spec. ANSI B18.15. Traceability and Mechanical test values are available with each shipment upon request.
Related
Related
Related