Galway Vertical Panel Oak Fire DoorThe Galway is an FD30 oak fire door with five bevel-cut vertical panels that run the height of the door and show off the oak grain, a simple, rustic face. It suits period and country homes as well as our modern oak internal doors. Like every genuine fire door it is not solid oak; it is faced in oak veneer over a solid, fire-resisting core, so the design still carries natural oak grain and warmth.It is rated FD30 for up to 30 minutes of fire resistance, with third-party certification under both the Certifire and BM TRADA Q-Mark schemes. A fire door only performs to its rating as part of a complete, fitted set, so it should hang in a fire-rated frame or lining, on the correct fire-rated hinges, with intumescent strips and smoke seals around the leaf, and on at least three hinges.The door is edged with oak lippings and carries a generous trimming allowance, with up to 30mm in total that can be taken off the width and height for a clean fit. It sits against oak skirting and architrave in a matching tone. The veneer is FSC certified, and the door carries a 10 year guarantee against manufacturing defects.It takes a lever handle and the appropriate fire-rated hinges, so you can match the ironmongery from our door handles and hardware.Supplied unfinished and lightly sanded, it needs treating before it goes into use: seal every face and every edge, including the top and bottom, with a suitable hardwax oil, paying particular attention to the hinge, latch and handle cut-outs and any trimmed edge. Our door treatments cover what to use, and the maintenance guide explains keeping it topped up.Key Product Information FD30 rated for up to 30 minutes of fire resistance Certifire and BM TRADA Q-Mark third-party certified Oak veneer over a solid, fire-resisting core with oak lippings, not solid oak Five bevel-cut vertical panels that show off the oak grain Supplied unfinished, with up to 30mm total trimming allowance FSC certified oak veneer, 10 year guarantee
