Introducing the sharpest Game Boy Advance display yet. Gone is the blur of early 2000s hardware. Enjoy your favorite GBA titles with this startlingly crisp and impressively vibrant backlit IPS LCD display by Funny Playing. V2 includes an upgraded ribbon cable that eliminates the screen tearing for a seamless display. Please read the product description carefully and in its entirety before purchasing. NOTE: Due to some shells, such as the Funny Playing GBA shells, being moulded for the IPS, the 3D-printed bracket is no longer included in this kit, as it cannot be used with these shells. If you are still in need of a centring bracket, they are available for purchase separately. Features V2 includes a newly synchronized clock to fix the diagonal screen tearing present in the first iteration of the ribbon cable Streamlined V2 ribbon design for easy installation Initial brightness to 30% and optimized night brightness settings on V2 Backlit IPS LCD brighter than AGS-101 or NDSL displays Crisper image than the AGS-101 Proportional image Fast refresh rate with no blur Wide viewing angle Easy, solder-free installation with little trimming involved 10 brightness levels (requires soldering three wires) Supports the software-based sleep mode built into select games Included 1 x IPS LCD 1 x Ribbon cable adapter (compatible with 32 and 40-pin boards) 1 x Foam tape Documentation Please check out our tutorial for instructions on how to install the IPS LCD (centered and offset methods) and the built-in brightness controller. Updated pictures with the V2 ribbon are forthcoming. Notes V2 eliminates the screen tearing from the first iteration of the ribbon cable and streamlines the ribbon design Unlike the AGS-101 display, the IPS LCD is much thinner and has a larger bezel on the left side. Since most of the display is not supported by the shell, we have designed a 3D-printed centering bracket. It's also available separately. The IPS panel's viewing area is slight larger than that of the AGS-101. In order to make the entire display visible, the LCD requires a lens with a slightly larger viewing area (~1 mm on each side). We sell silk screen centered lenses with this larger viewing opening. The interior left wall (D-pad side) must be removed to center the viewing area on the display. Since the viewing area is approximately the same dimensions as the shell's display cut-out (~77 mm) the the edge of the shell will be visible unless trimmed. Wires to connect the brightness controller are not included with the LCD. We recommend using 30 AWG silicone stranded-core wire. 11-hours of battery life on brightness level 6 with volume, tested using our 1700mAh rechargeable battery pack. Backlight bleeding protectors are neither necessary or usable with the IPS LCD V1 of the ribbon cable presents a visible diagonal frame refresh that occurs in moments of transition, which is noticeable in some games. This is due to the frame buffer. It's subtle and we consider the benefits of the display to outweigh this minimal tearing, but please keep this in mind before you purchase V1 of this product. Warning We strongly recommend testing the display before installing it in your Game Boy Advance. Please follow our Display Testing Guide to confirm the kit is working before the adhesive is secured, the display protection sheet removed, or any non-critical soldering to the ribbon or driver PCB. We are unable to accept returns or replacements on kits that have been installed in a console. Individual replacement parts may be available in the "Included" section above. The ribbon is very fragile, be sure to handle it carefully to avoid damage. Too much pressure can permanently damage the display, do not force the shell closed around the LCD. Ensure the shell is properly trimmed for the display before attempting to install it. Change Log 2020-02-13: Changed kit content 2019-09-05: Removed v1 upgrade promotion. 2019-08-11: Introduced V2 of the ribbon cable. Updated product description accordingly. Discounted remaining stock of V1. 2019-07-11: Added note about backlight bleeding protector. Added note about compatibility with software-based sleep mode. 2019-07-09: Added note about testing display before applying foam tape. 2019-06-27: Added note about battery life. 2019-06-21: Clarified product notes, specified that offset lens includes metallic Game Boy Advance logo, updated tutorial, added wire gauge recommendation, removed pre-order. 2019-06-12: 3D-printed centering bracket added to what's included in the LCD kit. 2019-06-10: Description updated to include notes about viewing area and diagonal screen tearing. 2018-06-08: Product added with a note that description was in progress.
Related
Related
Related
Related