Garmin Boat Switch

SailRACE Verified independent store

→

All in one Replace existing two-element systems (fuse box and switches) to facilitate the control and operation of on-board functions. Digital control Control and protect up to 20 circuits from the plotter instead of using a button or a physical switch. ON/OFF Switches The switching outputs control the bilge pump and the non-dimmable lights, such as navigation and courtesy lights. Mitigatable departures The pulse sliders allow you to adjust the brightness on board to your liking. Momentary outings Control the horns and much more. You just have to press and hold and release depending on the desired duration of the sound. Nursery timer A built-in timer makes the pump recycle water to keep the fish alive and the pumps running for longer. Supervise the deposits Detects and calibrates the transmitter of up to four tanks, such as those of fuel, fresh water, gray water, black water and nursery. Additional tickets Check the voltages of the internal and starting batteries, monitor the operation of the bilge pump and connect optional physical switches. Upgrade your boat Install the system on existing boats without special tools or configuration using cables with 18′′ conductors and color-coded channel cables. Specifications: Misc General Dimensions (An. x Al. x Pr.) (Only the unit) 9,1 X ″ X 4,2 mm (″1,5 X ″230 X 10638) Weight (Only the unit) 14,1 g (400 oz) Ambient temperature From -20 °C to 55 °C Classification of the water in the box IP65 Communication Red CAN-bus NMEA 2000®, LEN-0 Departures High side 13 channels of 10 A, 7 channels of 5 A Departures Grounding switch input 15 Monitor of the bilde bomb 2 Analog input Voltios 3 a 0-16 V +/-1 % Resistance 2 a 0-1500 ohmios +/-5 % Electric power Maximum current 50 A Power consumption off 60 mA Supply voltage (12 V) 9-16 V cc Connector NMEA 2000® Macro micro M12 de 5 pines Channels Molex MX150 L 16 Circuits Power terminal Perno M6 FAQs How should unused wires be handled?Insulate any unused bare wire connections after completing installation. What safety precautions should be followed during installation?Disconnect the vessel's power supply before starting installation and ensure the device is grounded per instructions. Who should install the Garmin Boat Switch?Garmin strongly recommends professional installation by someone with knowledge of electrical systems. Is it necessary to install both wiring harnesses?Yes, connect both X1 and X2 wiring harnesses even if not every wire is used. What should I consider when planning wiring connections?Carefully plan power, network, and switched device layout; use marine-grade, waterproof connectors for all bare wire connections. How do I connect devices to the wiring harness?Use the provided wiring harnesses; connect using marine-grade connectors and label wires at both ends for easy identification. Is mounting hardware included?No, mounting hardware like pan-head screws is not included and must be sourced separately. What kind of mounting screws should I use?Use pan-head screws of appropriate length; countersunk screws and lubricants may damage the housing. Should I use lubricants or grease when mounting?Do not apply grease or lubricant to the screws; this can damage the device housing. How should I mount the device to avoid damage?Mount only on a flat, vertical surface using pan-head screws; do not overtighten or use the device as a drilling template. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "How should unused wires be handled?", "acceptedAnswer": {"@type": "Answer", "text": "Insulate any unused bare wire connections after completing installation."}}, {"@type": "Question", "name": "What safety precautions should be followed during installation?", "acceptedAnswer": {"@type": "Answer", "text": "Disconnect the vessel's power supply before starting installation and ensure the device is grounded per instructions."}}, {"@type": "Question", "name": "Who should install the Garmin Boat Switch?", "acceptedAnswer": {"@type": "Answer", "text": "Garmin strongly recommends professional installation by someone with knowledge of electrical systems."}}, {"@type": "Question", "name": "Is it necessary to install both wiring harnesses?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, connect both X1 and X2 wiring harnesses even if not every wire is used."}}, {"@type": "Question", "name": "What should I consider when planning wiring connections?", "acceptedAnswer": {"@type": "Answer", "text": "Carefully plan power, network, and switched device layout; use marine-grade, waterproof connectors for all bare wire connections."}}, {"@type": "Question", "name": "How do I connect devices to the wiring harness?", "acceptedAnswer": {"@type": "Answer", "text": "Use the provided wiring harnesses; connect using marine-grade connectors and label wires at both ends for easy identification."}}, {"@type": "Question", "name": "Is mounting hardware included?", "acceptedAnswer": {"@type": "Answer", "text": "No, mounting hardware like pan-head screws is not included and must be sourced separately."}}, {"@type": "Question", "name": "What kind of mounting screws should I use?", "acceptedAnswer": {"@type": "Answer", "text": "Use pan-head screws of appropriate length; countersunk screws and lubricants may damage the housing."}}, {"@type": "Question", "name": "Should I use lubricants or grease when mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Do not apply grease or lubricant to the screws; this can damage the device housing."}}, {"@type": "Question", "name": "How should I mount the device to avoid damage?", "acceptedAnswer": {"@type": "Answer", "text": "Mount only on a flat, vertical surface using pan-head screws; do not overtighten or use the device as a drilling template."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more