Garmin GPSMAP 1222

SailRACE Verified independent store

→

MAPS Renew your plotter with the optional Garmin Navionics+™ cartography or the advanced Garmin Navionics Vision+™, which includes built-in coastal and indoor content, access to da ily updates, Auto Guidance+™1 technology and much more. Fluid FOLLOW-UP The integrated 10 Hz GPS and GLONASS receiver, fast and with great responsiveness, updates the position and direction 10 times per second so that the movement on the screen is more fluid. Compatible with connection GPSMAP plotters are fully compatible with the Garmin network and the NMEA 2000® network, in addition to NMEA 0183 technology. Transfer of waypoints with gpx format Easily transfer frequently used waypoints, tracks or routes from other devices using the industry-standard GPX software format. Full network sharing Compatibility with the Garmin network allows you to share probe data, maps, user data, data from closed antenna or open matrix radars and Panoptix and LiveScope probes between several units. Connectivity with the engine Controls RPM, fuel flow, temperature, adjustment and other important information. Check with the engine manufacturer if you have specific hardware needs. POWER-POLE® Anchor for shallow areas By connecting certain Garmin plotters with a Force® electric motor and a compatible Power-Pole shallow anchoring system, you can access advanced boat control functions3 from the plotter, such as automatic intelligent anchor deployment, intelligent anchor displacement, automatic retraction, clutch detection and anchoring at the end of the route when navigating with Auto Guidance1. You spend more time fishing and less positioning yourself. Charging integration from POWER-POLE Your Power-Pole CHARGE nautical power manager integrates with compatible Garmin plotters to give you more battery life and power in the water. It allows you to charge batteries on the go, monitor energy consumption, select where energy is allocated, control emergency starts and even transfer energy between batteries, all from the plotter screen. Specifications: Physical and performance Screen size (Width/High) 26.2 X 16.3 cm; 12.1" (30.7 cm) Diagonal Power input 10 to 32 Vdc Screen resolution (Width/High) 1280 x 800 píxeles GPS Yes Dimensions of the unit (Width/High/Depth) 35,8 X 22,6 X 6,9 cm Receptor High sensitivity of 10 Hz Classification of water resistance IPX7 Weight 2,34 kg Assembly options On the surface or recessed Type of screen Screen WXGA Maps and navigation Garmin Navionics Vision+™ Yes Supports data cards 2 Cards Sd™ Rutas 100 Garmin Navionics+™ Yes Characteristics Waypoints 5.000 Navigation functions Yes Compatible with NMEA 0183 Yes Built-in receiver Yes USB ports No Topo 100K Yes SideVü Yes (with external black box) Supports DSC (sends the position data to the VHF compatible with DSC) Yes Touch screen No LakeVü g3 Ultra Yes Compatible with NMEA 2000® Yes ActiveCaptain-yhteensopiva Yes Typical current consumption at 12 V DC 2.2 A NMEA 2000® Ports 1 Tide prediction Yes Glonass Yes Track points 50,000 Panoptix™ sonar Yes Garmin Marine Network ports™ 2 LakeVü g3 Yes Compatible with WAAS Yes GSD™ Black Box -luotaimen tuki Yes Maximum current consumption at 12 V DC 2.9 A Compatible with Garmin SmartMode (customizable monitor default settings) Yes Auto ruta No Maximum electricity consumption at 10 V DC 34.8W BlueChart g3 Yes Standard maps Yes LakeVü (interior) No Show the probe Yes ANT+™ (Connectivity) Yes GCV™ Black Box -luotaimen tuki Yes BNC port for external antenna No Entrance ports NMEA 0183 1 Voice audio alerts No BlueChart g3 Vision Yes Garmin Wi-Fi® network (local connection) Yes Screen keys With keys Garmin Quickdraw Contours Yes Bluetooth® calls Yes Supports AIS (tracks the position of the target boats) Yes Video output ports - None None Compatibility with raster cards Yes Entrance ports (Tx) NMEA 0183 1 Compatibility with OneHelm™ No ClearVü Yes (with external black box) Tracks 50 saved tracks Wireless control Yes Admite radios compatibles con FUSION-Link™ Yes Galileo No LiveScope Yes Power output 1 kW Ports for 12-pin transducer 1 BlueChart® (coast) No Traditional probe (dual beam/frequency) Yes (with external black box) Compatible with GRID™ (Garmin remote input device) Yes Video input ports 1 BNC Composite FAQs How should I orient the PoE isolation coupler during installation?Point the PoE isolation coupler down, or horizontal with a drip loop, to avoid water retention around the connector. How should the PoE isolation coupler be oriented during installation?The PoE isolation coupler should point down, or horizontal with a drip loop, to avoid water retention at the connector. How should I adjust the camera for best tracking performance?Adjust the camera angle and height values based on its installation until camera view and tracking performance operate as expected. Can I print my own mounting template?It is not recommended to print your own mounting template; use the template provided in the box. If necessary, ensure correct paper size. What wiring should I use to connect network cameras to the Garmin Marine Network?A shielded cable, like CAT 5e F/FTP, is recommended for best equipment protection when connecting standard Ethernet gear to the Garmin Marine Network. Can I connect multiple video cameras to the Garmin Marine Network?Yes, you can connect multiple supported video cameras to the network. For best network performance, stream no more than five at once. How should the PoE isolation coupler be positioned for water protection?Point the PoE isolation coupler down, or horizontal with a drip loop, to avoid water retention around the connector. Are there limits to how many composite video sources I can view in combinations?Only a single combination screen function can use the composite video input connection to the chartplotter at one time. What should I do if my chartplotter cannot connect to my camera?If there's a password mismatch, reset your camera's password to factory defaults and refer to the camera documentation. How do I associate a FLIR camera that does not support IP video?For analog FLIR cameras, you must create an association between the camera and a chartplotter during the initial setup. How can I change the associated video input device for a FLIR camera?Use Menu > Video Setup > Set Input on the video screen to change the associated source for your FLIR camera. What safety precaution is provided regarding water exposure for the device?Do not immerse the device or batteries in water or other liquids. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "How should I orient the PoE isolation coupler during installation?", "acceptedAnswer": {"@type": "Answer", "text": "Point the PoE isolation coupler down, or horizontal with a drip loop, to avoid water retention around the connector."}}, {"@type": "Question", "name": "How should the PoE isolation coupler be oriented during installation?", "acceptedAnswer": {"@type": "Answer", "text": "The PoE isolation coupler should point down, or horizontal with a drip loop, to avoid water retention at the connector."}}, {"@type": "Question", "name": "How should I adjust the camera for best tracking performance?", "acceptedAnswer": {"@type": "Answer", "text": "Adjust the camera angle and height values based on its installation until camera view and tracking performance operate as expected."}}, {"@type": "Question", "name": "Can I print my own mounting template?", "acceptedAnswer": {"@type": "Answer", "text": "It is not recommended to print your own mounting template; use the template provided in the box. If necessary, ensure correct paper size."}}, {"@type": "Question", "name": "What wiring should I use to connect network cameras to the Garmin Marine Network?", "acceptedAnswer": {"@type": "Answer", "text": "A shielded cable, like CAT 5e F/FTP, is recommended for best equipment protection when connecting standard Ethernet gear to the Garmin Marine Network."}}, {"@type": "Question", "name": "Can I connect multiple video cameras to the Garmin Marine Network?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, you can connect multiple supported video cameras to the network. For best network performance, stream no more than five at once."}}, {"@type": "Question", "name": "How should the PoE isolation coupler be positioned for water protection?", "acceptedAnswer": {"@type": "Answer", "text": "Point the PoE isolation coupler down, or horizontal with a drip loop, to avoid water retention around the connector."}}, {"@type": "Question", "name": "Are there limits to how many composite video sources I can view in combinations?", "acceptedAnswer": {"@type": "Answer", "text": "Only a single combination screen function can use the composite video input connection to the chartplotter at one time."}}, {"@type": "Question", "name": "What should I do if my chartplotter cannot connect to my camera?", "acceptedAnswer": {"@type": "Answer", "text": "If there's a password mismatch, reset your camera's password to factory defaults and refer to the camera documentation."}}, {"@type": "Question", "name": "How do I associate a FLIR camera that does not support IP video?", "acceptedAnswer": {"@type": "Answer", "text": "For analog FLIR cameras, you must create an association between the camera and a chartplotter during the initial setup."}}, {"@type": "Question", "name": "How can I change the associated video input device for a FLIR camera?", "acceptedAnswer": {"@type": "Answer", "text": "Use Menu > Video Setup > Set Input on the video screen to change the associated source for your FLIR camera."}}, {"@type": "Question", "name": "What safety precaution is provided regarding water exposure for the device?", "acceptedAnswer": {"@type": "Answer", "text": "Do not immerse the device or batteries in water or other liquids."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more