Garmin GPSMAP 1222xsv
MAPS Renew your plotter with the optional Garmin Navionics+™ cartography or the advanced Garmin Navionics Vision+™, which includes built-in coastal and indoor content, access to da ily updates, Auto Guidance+™1 technology and much more. Fluid FOLLOW-UP The integrated 10 Hz GPS and GLONASS receiver, fast and with great responsiveness, updates the position and direction 10 times per second so that the movement on the screen is more fluid. Compatible with connection GPSMAP plotters are fully compatible with the Garmin network and the NMEA 2000® network, in addition to NMEA 0183 technology. Transfer of waypoints with gpx format Easily transfer frequently used waypoints, tracks or routes from other devices using the industry-standard GPX software format. Full network sharing Compatibility with the Garmin network allows you to share probe data, maps, user data, data from closed antenna or open matrix radars and Panoptix and LiveScope probes between several units. Connectivity with the engine Controls RPM, fuel flow, temperature, adjustment and other important information. Check with the engine manufacturer if you have specific hardware needs. POWER-POLE® Anchor for shallow areas By connecting certain Garmin plotters with a Force® electric motor and a compatible Power-Pole shallow anchoring system, you can access advanced boat control functions3 from the plotter, such as automatic intelligent anchor deployment, intelligent anchor displacement, automatic retraction, clutch detection and anchoring at the end of the route when navigating with Auto Guidance1. You spend more time fishing and less positioning yourself. Charging integration from POWER-POLE Your Power-Pole CHARGE nautical power manager integrates with compatible Garmin plotters to give you more battery life and power in the water. It allows you to charge batteries on the go, monitor energy consumption, select where energy is allocated, control emergency starts and even transfer energy between batteries, all from the plotter screen. Specifications: Physical and performance Screen size (Width/High) 26.2 X 16.3 cm; 12.1" (30.7 cm) Diagonal Power input 10 to 32 Vdc Screen resolution (Width/High) 1280 x 800 píxeles GPS Yes Dimensions of the unit (Width/High/Depth) 35,8 X 22,6 X 6,9 cm Receptor High sensitivity of 10 Hz Classification of water resistance IPX7 Weight 2,34 kg Assembly options On the surface or recessed Type of screen Screen WXGA Maps and navigation Garmin Navionics Vision+™ Yes Supports data cards 2 Cards Sd™ Rutas 100 Garmin Navionics+™ Yes Characteristics Waypoints 5.000 Navigation functions Yes Compatible with NMEA 0183 Yes Built-in receiver Yes USB ports No Topo 100K Yes SideVüA Yes Supports DSC (sends the position data to the VHF compatible with DSC) Yes, with CHIRP (integrated) Touch screen No LakeVü g3 Ultra Yes Compatible with NMEA 2000® Yes ActiveCaptain-yhteensopiva Yes Typical current consumption at 12 V DC 2.2 A NMEA 2000® Ports 1 Tide prediction Yes Glonass Yes Track points 50,000 Panoptix™ sonar Yes Garmin Marine Network ports™ 2 LakeVü g3 Yes Compatible with WAAS Yes GSD™ Black Box -luotaimen tuki Yes Maximum current consumption at 12 V DC 2.9 A Compatible with Garmin SmartMode (customizable monitor default settings) Yes Auto ruta No Maximum electricity consumption at 10 V DC 34.8W BlueChart g3 Yes Standard maps Yes LakeVü (interior) No Show the probe Yes ANT+™ (Connectivity) Yes GCV™ Black Box -luotaimen tuki Yes BNC port for external antenna No Entrance ports NMEA 0183 1 Voice audio alerts No BlueChart g3 Vision Yes Garmin Wi-Fi® network (local connection) Yes Screen keys With keys Garmin Quickdraw Contours Yes Bluetooth® calls Yes Supports AIS (tracks the position of the target boats) Yes Video output ports - None None Compatibility with raster cards Yes Entrance ports (Tx) NMEA 0183 1 Compatibility with OneHelm™ No ClearVü Yes, with CHIRP (integrated) Tracks 50 saved tracks Wireless control Yes Admite radios compatibles con FUSION-Link™ Yes Galileo No LiveScope Yes Power output 1 kW Ports for 12-pin transducer 1 BlueChart® (coast) No Traditional probe (dual beam/frequency) Integrated (one-channel CHIRP, 70/83/200 kHz, L, M, H CHIRP) Compatible with GRID™ (Garmin remote input device) Yes Video input ports 1 BNC FAQs Is it safe to print my own mounting template for installation?It is not recommended to print your own mounting template. Always use the template in the product box for the correct size. How should a PoE isolation coupler be oriented for safe installation?Point the PoE isolation coupler down, or horizontal with a drip loop to avoid water retention around the connector. How should you orient a PoE isolation coupler during installation?Point the PoE isolation coupler down, or horizontal with a drip loop to avoid water retention around the connector. What should you use when wiring network cameras to the Garmin Marine Network?Always use a Garmin PoE Isolation Coupler (010-10580-10) to connect standard Ethernet equipment, such as network cameras or switches, to the Garmin Marine Network to avoid damage. Can you connect multiple supported video cameras to the Garmin Marine Network?Yes, you can connect multiple supported video cameras, and view them on any compatible networked chartplotter. How should composite video be connected from dual-payload FLIR cameras?Connect both the IR and V/IR composite video streams from dual-payload FLIR cameras to chartplotters with built-in video encoders for side-by-side display. How do you troubleshoot if the chartplotter cannot access a camera?If the chartplotter can't connect, you may need to reset the camera password to factory default settings per manufacturer instructions. What connectors should be used for best protection when wiring network cameras?A shielded cable, such as a CAT 5e F/FTP, offers the best protection for your equipment. How do you change FLIR camera settings from the chartplotter?You can change polarity, color scheme, and scene settings from the video screen menu on your chartplotter when a FLIR camera is connected. How should you associate a FLIR camera with a video input device?To associate, select your camera in the Video Source menu when prompted, forming a connection for video input. Is prior configuration needed for FLIR IP cameras before use?No, FLIR IP cameras are plug-and-play and are automatically detected when connected to the Garmin Marine Network. How many video sources can be streamed simultaneously for best performance?Garmin recommends streaming no more than five video sources simultaneously on the marine network for optimal performance. How do you set FLIR camera angle and height for tracking?The camera angle specifies its orientation relative to the boat's front; height is how high it is above the heading sensor. Make small adjustments for best results. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Is it safe to print my own mounting template for installation?", "acceptedAnswer": {"@type": "Answer", "text": "It is not recommended to print your own mounting template. Always use the template in the product box for the correct size."}}, {"@type": "Question", "name": "How should a PoE isolation coupler be oriented for safe installation?", "acceptedAnswer": {"@type": "Answer", "text": "Point the PoE isolation coupler down, or horizontal with a drip loop to avoid water retention around the connector."}}, {"@type": "Question", "name": "How should you orient a PoE isolation coupler during installation?", "acceptedAnswer": {"@type": "Answer", "text": "Point the PoE isolation coupler down, or horizontal with a drip loop to avoid water retention around the connector."}}, {"@type": "Question", "name": "What should you use when wiring network cameras to the Garmin Marine Network?", "acceptedAnswer": {"@type": "Answer", "text": "Always use a Garmin PoE Isolation Coupler (010-10580-10) to connect standard Ethernet equipment, such as network cameras or switches, to the Garmin Marine Network to avoid damage."}}, {"@type": "Question", "name": "Can you connect multiple supported video cameras to the Garmin Marine Network?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, you can connect multiple supported video cameras, and view them on any compatible networked chartplotter."}}, {"@type": "Question", "name": "How should composite video be connected from dual-payload FLIR cameras?", "acceptedAnswer": {"@type": "Answer", "text": "Connect both the IR and V/IR composite video streams from dual-payload FLIR cameras to chartplotters with built-in video encoders for side-by-side display."}}, {"@type": "Question", "name": "How do you troubleshoot if the chartplotter cannot access a camera?", "acceptedAnswer": {"@type": "Answer", "text": "If the chartplotter can't connect, you may need to reset the camera password to factory default settings per manufacturer instructions."}}, {"@type": "Question", "name": "What connectors should be used for best protection when wiring network cameras?", "acceptedAnswer": {"@type": "Answer", "text": "A shielded cable, such as a CAT 5e F/FTP, offers the best protection for your equipment."}}, {"@type": "Question", "name": "How do you change FLIR camera settings from the chartplotter?", "acceptedAnswer": {"@type": "Answer", "text": "You can change polarity, color scheme, and scene settings from the video screen menu on your chartplotter when a FLIR camera is connected."}}, {"@type": "Question", "name": "How should you associate a FLIR camera with a video input device?", "acceptedAnswer": {"@type": "Answer", "text": "To associate, select your camera in the Video Source menu when prompted, forming a connection for video input."}}, {"@type": "Question", "name": "Is prior configuration needed for FLIR IP cameras before use?", "acceptedAnswer": {"@type": "Answer", "text": "No, FLIR IP cameras are plug-and-play and are automatically detected when connected to the Garmin Marine Network."}}, {"@type": "Question", "name": "How many video sources can be streamed simultaneously for best performance?", "acceptedAnswer": {"@type": "Answer", "text": "Garmin recommends streaming no more than five video sources simultaneously on the marine network for optimal performance."}}, {"@type": "Question", "name": "How do you set FLIR camera angle and height for tracking?", "acceptedAnswer": {"@type": "Answer", "text": "The camera angle specifies its orientation relative to the boat's front; height is how high it is above the heading sensor. Make small adjustments for best results."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]}
