Garmin GPSMAP 1223xsv

SailRACE Verified independent store

→

ULTRA-HIGH-DEFINITION Exploration probe Enjoy SideVü and ClearVü ultra-high-definition exploration probes integrated with bright and high-contrast color palettes to distinguish the fish from the structure. The GPSMAP® X3 series also supports traditional 1 kW CHIRP probe capabilities. Support for integrated probe is only available on xsv models. Faster, sharper, smarter Thanks to its additional processing power, its new stylized design with borderless glass and its smaller unit size, it is very easy to upgrade this plotter in a wider range of dashboard configurations. Improved visualization optics The new higher resolution IPS screens for 9′′ and 12′′ plotters offer better visibility and readability in sunlight from any angle, with 50% more pixels than the previous generation of 9′′ GPSMAP devices. MAPS Renew your plotter with the optional Garmin Navionics+™ mapping or the advanced Garmin Navionics Vision+™, which includes built-in coastal and indoor content, access to daily updates, Auto Guidance+™2 technology and much more. POWER-POLE® Anchor for shallow areas By connecting certain Garmin plotters with a Force® electric motor and a compatible Power-Pole shallow anchor system, you can access advanced boat control functions6 from the plotter, such as automatic intelligent anchor deployment, intelligent anchor displacement, automatic fold-up, clutch detection and anchoring at the end of the route when navigating with Auto Guidance3. You spend more time fishing and less positioning yourself. Charging integration from POWER-POLE Your Power-Pole CHARGE nautical power manager integrates with compatible Garmin plotters to give you more battery life and power in the water. It allows you to charge batteries on the go, monitor energy consumption, select where energy is allocated, control emergency starts and even transfer energy between batteries, all from the plotter screen. Navigation functions garmin sailassist™ Visualize functions such as laylines, race start line, improved wind rose, course and path lines on land, real wind data fields and slider of tides, currents and weather, wind angle, direction and drift, wind speed and many others. Optional premium navigation functions These options offer you the best Garmin and Navionics® data, Auto Guidance3 technology and other premium navigation features. Vela polars Use the polar table to consult key data, such as the speed at which you must go with a certain angle and wind speed. So you will know if you need to modify the setting of the candles. Specifications: Physical and performance Screen size (Width/High) 10.3" x 6.4"; 12.1" diagonally (26.2 x 16.3 cm; 30.7 cm diagonally) Power input 10 to 32 Vdc Screen resolution (Width/High) 1280 x 800 (píxeles) GPS Yes Dimensions of the unit (Width/High/Depth) 30,8 X 22,8 X 8.2 cm (12,1" X 8,9" X 3,2") Receptor High sensitivity of 10 Hz Classification of water resistance IPX7 Weight 3kg (6,6 lb) Assembly options On the surface or recessed Type of screen Pantalla WSVGA Maps and navigation Garmin Navionics Vision+™ Yes Supports data cards 2 microSD™ cards (on the back of the unit) Rutas 100 Garmin Navionics+™ Yes Characteristics Waypoints 5,000 Navigation functions Yes Compatible with NMEA 0183 Yes Built-in receiver Yes Ports USB Yes Topo 100K Yes SideVü 260/455/800/1000/1200 kHz integrated Amite DSC (sends the position data to the VHF compatible with DSC) Yes Touch screen Yes LakeVü g3 Ultra Yes Compatible with NMEA 2000® Yes ActiveCaptain-yhteensopiva Yes Typical current consumption at 12 V DC 1.68 A NMEA 2000® Ports 1 Tide prediction Yes Glonass Yes Track points 50,000 Panoptix™ sonar Yes Garmin Marine Network ports™ 2 LakeVü g3 Yes Compatible with WAAS Yes GSD™ Black Box -luotaimen tuki Yes Maximum current consumption at 12 V DC 3.56 A Compatible with Garmin SmartMode (customizable monitor default settings) Yes Auto ruta Yes Maximum electricity consumption at 10 V DC 43 W BlueChart g3 Yes Standard maps Yes LakeVü (interior) Yes Show the probe Yes ANT+™ (Connectivity) Yes GCV™ Black Box -luotaimen tuki Yes BNC port for external antenna No Entrance ports NMEA 0183 1 Voice audio alerts Yes BlueChart g3 Vision Yes Garmin Wi-Fi® network (local connection) Yes J1939 ports 1 Screen keys Touch screen Garmin Quickdraw Contours Yes Bluetooth® calls Yes Supports AIS (tracks the position of the target boats) Yes Compatibility with raster cards Yes Entrance ports (Tx) NMEA 0183 1 Compatibility with OneHelm™ Yes ClearVü 260/455/800/1000/1200 kHz integrated Tracks 50 saved tracks Wireless control Yes Supports radios compatible with FUSION-Link™ Yes Galileo Yes LiveScope Yes Power output 1 kW Ports for 12-pin transducer 1 BlueChart® (coast) Yes Traditional probe (dual beam/frequency) Integrated (one-channel CHIRP, 70/83/200 kHz, L, M, H CHIRP) Compatible with GRID™ (Garmin remote input device) Yes Video input ports 1 BNC FAQs Can you print your own mounting template for installation?It is not recommended to print a template yourself; use the template in the box for accurate sizing. How do you secure the adapter plate during installation?You can secure the adapter plate with either the included wood screws or machine screws and nuts, depending on the existing holes. What care should be taken when using mounting templates?Use only the template included in the product box for accuracy—incorrect paper size or scaling may result in a miscut surface. Should the device itself be used as a template for drilling mounting holes?No, using the device as a template for drilling may damage the glass display and void the warranty. How should composite video connections be handled for dual payload FLIR cameras?Use the V/IR cable to switch between day and infrared video; IR-only cable is for infrared video only. V/IR offers more flexibility. What is required to connect third-party cameras to the Garmin Marine Network?To connect standard Ethernet equipment like network cameras, a Garmin Power over Ethernet (PoE) Isolation Coupler must be used for safety and compatibility. Should you use the device itself as a template for drilling holes?Do not use the device as a template when drilling holes, as this may damage the glass display and void the warranty. Can you connect multiple video cameras to the Garmin Marine Network?Yes, you can connect multiple supported cameras, but streaming more than five at once is not recommended for best performance. How should you verify your camera appears in the video source menu?Ensure all power and network connections are secure. It may take several minutes for devices to appear in the menu. How do you change the video input source for a connected FLIR camera?On the video screen, choose your FLIR camera, then select Menu > Video Setup > Set Input and choose the new source. What safety responsibilities should users follow?Users are responsible for safe, prudent vessel operation; do not rely solely on the device for navigation or hazard avoidance. What should you not use the chartplotter device for?Do not use it as a template for drilling or for any purpose requiring precise measurement of direction, distance, or topography. How do you associate a FLIR camera with a video input device?For FLIR cameras without IP video, associate the camera with a chartplotter via a prompt in the Video Source menu the first time you select it as source. Are government charts still needed if using this chartplotter?Yes, use official government charts along with the device for safe navigation; electronic charts are only to facilitate navigation. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Can you print your own mounting template for installation?", "acceptedAnswer": {"@type": "Answer", "text": "It is not recommended to print a template yourself; use the template in the box for accurate sizing."}}, {"@type": "Question", "name": "How do you secure the adapter plate during installation?", "acceptedAnswer": {"@type": "Answer", "text": "You can secure the adapter plate with either the included wood screws or machine screws and nuts, depending on the existing holes."}}, {"@type": "Question", "name": "What care should be taken when using mounting templates?", "acceptedAnswer": {"@type": "Answer", "text": "Use only the template included in the product box for accuracy—incorrect paper size or scaling may result in a miscut surface."}}, {"@type": "Question", "name": "Should the device itself be used as a template for drilling mounting holes?", "acceptedAnswer": {"@type": "Answer", "text": "No, using the device as a template for drilling may damage the glass display and void the warranty."}}, {"@type": "Question", "name": "How should composite video connections be handled for dual payload FLIR cameras?", "acceptedAnswer": {"@type": "Answer", "text": "Use the V/IR cable to switch between day and infrared video; IR-only cable is for infrared video only. V/IR offers more flexibility."}}, {"@type": "Question", "name": "What is required to connect third-party cameras to the Garmin Marine Network?", "acceptedAnswer": {"@type": "Answer", "text": "To connect standard Ethernet equipment like network cameras, a Garmin Power over Ethernet (PoE) Isolation Coupler must be used for safety and compatibility."}}, {"@type": "Question", "name": "Should you use the device itself as a template for drilling holes?", "acceptedAnswer": {"@type": "Answer", "text": "Do not use the device as a template when drilling holes, as this may damage the glass display and void the warranty."}}, {"@type": "Question", "name": "Can you connect multiple video cameras to the Garmin Marine Network?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, you can connect multiple supported cameras, but streaming more than five at once is not recommended for best performance."}}, {"@type": "Question", "name": "How should you verify your camera appears in the video source menu?", "acceptedAnswer": {"@type": "Answer", "text": "Ensure all power and network connections are secure. It may take several minutes for devices to appear in the menu."}}, {"@type": "Question", "name": "How do you change the video input source for a connected FLIR camera?", "acceptedAnswer": {"@type": "Answer", "text": "On the video screen, choose your FLIR camera, then select Menu > Video Setup > Set Input and choose the new source."}}, {"@type": "Question", "name": "What safety responsibilities should users follow?", "acceptedAnswer": {"@type": "Answer", "text": "Users are responsible for safe, prudent vessel operation; do not rely solely on the device for navigation or hazard avoidance."}}, {"@type": "Question", "name": "What should you not use the chartplotter device for?", "acceptedAnswer": {"@type": "Answer", "text": "Do not use it as a template for drilling or for any purpose requiring precise measurement of direction, distance, or topography."}}, {"@type": "Question", "name": "How do you associate a FLIR camera with a video input device?", "acceptedAnswer": {"@type": "Answer", "text": "For FLIR cameras without IP video, associate the camera with a chartplotter via a prompt in the Video Source menu the first time you select it as source."}}, {"@type": "Question", "name": "Are government charts still needed if using this chartplotter?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, use official government charts along with the device for safe navigation; electronic charts are only to facilitate navigation."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more