Garmin GPSMAP 9022

SailRACE Verified independent store

→

High quality plotter The IPS touch screen with 4K resolution readable in sunlight is available for the largest integrated plotter in the industry, with an end-to-end design that gi ves it a modern, luxurious and fluid appearance. Faster. much faster. The processing power is 7 times faster than in previous generations so you can enjoy superior performance; draw charts quickly and calculate Auto Guidance+™2 routes at the speed of light with an optional Garmin Navionics+™ subscription. Red garmin bluenet Create large networks with several plotters, cameras, radars and probes, and enjoy a network speed up to 10 times faster and with hardly any delays. Fun options Enjoy audiovisual integrations that will allow you to watch and listen to the same video on all screens and speakers on the network. HIGH-DEFINITION Probe Fishing in a spectacular high definition. Connect to any of our probe modules and view the lenses on the 4K screen (transducers are sold separately). Connect your ecosystem It integrates digital systems and assumes command to supervise, automate and control the boat. The plotter uses the NMEA 2000® and NMEA 0183 networks to establish the connection with the compatible accessories. Specifications: Physical and performance Screen size (Width/High) 40,9 x 23,0 x 46,9 cm (16,1″ x 9,1″ x 18,5″) Diagonally Power input 10 to 35 Vdc Screen resolution (Width/High) 3840 x 2160 píxeles GPS Yes Dimensions of the unit (Width/High/Depth) 18.0″ X 12.0″ X 2.7″ (45.7 cm X 30.5 cm X 6.9 cm) Receiver 10 Hz Classification of water resistance IPX7 Weight 6.42 kg Assembly options Recessed or flush Type of screen 4K, Ips Mapas y navegación Garmin Navionics+™ (coasts) No Garmin Navionics Vision+™ Yes Supports data cards 2 Cards microSD Garmin Navionics+ Of the interior and coasts No Garmin Navionics+ (interior) No Rutas 100 Garmin Navionics+™ Yes Características Waypoints 5000 Navigation functions Yes Compatible with NMEA 0183 Yes Built-in receiver No USB ports Yes (2 USB-C) Topo 100K No SideVü Yes (With compatible probe module) Amite DSC (sends the position data to the VHF compatible with DSC) Yes Touch screen Yes LakeVü g3 Ultra No Compatible with NMEA 2000® Yes ActiveCaptain-yhteensopiva Yes Typical current consumption at 12 V DC 4.6A NMEA 2000® Ports 1 Tide prediction No Glonass Yes Track points 50000 Panoptix™ sonar Yes LakeVü g3 No Compatible with WAAS Yes GSD™ Black Box -luotaimen tuki Yes Maximum current consumption at 12 V DC 5.0A Compatible with Garmin SmartMode (customizable monitor default settings) Yes Auto ruta No Maximum electricity consumption at 10 V DC 60W BlueChart g3 No Standard maps No Garmin BlueNet network ports 4 LakeVü (interior) No Integrated Auto Guidance+ No Show the probe Yes ANT+™ (connectivity) Yes GCV™ Black Box -luotaimen tuki Yes BNC port for external antenna No Entrance ports NMEA 0183 4 Voice audio alerts Yes BlueChart g3 Vision No Garmin Wi-Fi® network (local connection) Yes J1939 ports 1 Audio output Yes Screen keys Touch screen BeiDou Yes Garmin Quickdraw Contours Yes Bluetooth® calls Yes Supports AIS (tracks the position of the target boats) Yes Compatible with multi-band and multi-constellation GPS Yes Video output ports - None 1 HDMI Compatible with the Garmin SD card reader Yes Compatibility with raster cards No Entrance ports (Tx) NMEA 0183 2 Compatibility with OneHelm™ Yes ClearVü Yes (with compatible probe module) Tracks 50 saved tracks Wireless control Yes Admite radios compatibles con FUSION-Link™ Yes Galileo Yes LiveScope Yes BlueChart® (coast) No Traditional probe (dual beam/frequency) Yes (with compatible probe module) Compatible with GRID™ (Garmin remote input device) Yes Video input ports 1 (BNC composite); 2 HDMI (compatible with HDCP) FAQs Should I print my own mounting template for installation?It is not recommended to print your own mounting template. Use the template included in the product box to ensure proper sizing. What size hole is needed for nut plates during installation?For nut plates, drill a 7.2 mm (9/32 in.) hole as part of the mounting installation. Is there user-serviceable maintenance required for this device?There are no user-serviceable parts; only authorized Garmin service centers should perform repairs. What is the minimum distance the device should be from the user during installation?The device should be installed and operated with a minimum of 20 cm (7.87 in.) between the device and your body for RF compliance. How should I cut the flush mount template for a correct fit?Cut along the inside of the line on the flush mount template for the most accurate fit when mounting. What size pilot holes should I drill for wood screws in mounting?Drill 3.2 mm (1/8 in.) pilot holes for wood screws when preparing the mounting holes. How should the mounting holes be tapped if not using a nut plate?If no nut plate is used, tap the hole to M4 size. Can I repair or modify the device myself?No user-serviceable parts are included. Repairs should only be performed by an authorized Garmin service center. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Should I print my own mounting template for installation?", "acceptedAnswer": {"@type": "Answer", "text": "It is not recommended to print your own mounting template. Use the template included in the product box to ensure proper sizing."}}, {"@type": "Question", "name": "What size hole is needed for nut plates during installation?", "acceptedAnswer": {"@type": "Answer", "text": "For nut plates, drill a 7.2 mm (9/32 in.) hole as part of the mounting installation."}}, {"@type": "Question", "name": "Is there user-serviceable maintenance required for this device?", "acceptedAnswer": {"@type": "Answer", "text": "There are no user-serviceable parts; only authorized Garmin service centers should perform repairs."}}, {"@type": "Question", "name": "What is the minimum distance the device should be from the user during installation?", "acceptedAnswer": {"@type": "Answer", "text": "The device should be installed and operated with a minimum of 20 cm (7.87 in.) between the device and your body for RF compliance."}}, {"@type": "Question", "name": "How should I cut the flush mount template for a correct fit?", "acceptedAnswer": {"@type": "Answer", "text": "Cut along the inside of the line on the flush mount template for the most accurate fit when mounting."}}, {"@type": "Question", "name": "What size pilot holes should I drill for wood screws in mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Drill 3.2 mm (1/8 in.) pilot holes for wood screws when preparing the mounting holes."}}, {"@type": "Question", "name": "How should the mounting holes be tapped if not using a nut plate?", "acceptedAnswer": {"@type": "Answer", "text": "If no nut plate is used, tap the hole to M4 size."}}, {"@type": "Question", "name": "Can I repair or modify the device myself?", "acceptedAnswer": {"@type": "Answer", "text": "No user-serviceable parts are included. Repairs should only be performed by an authorized Garmin service center."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more