Garmin Hub OnDeck

SailRACE Verified independent store

→

TRACK Be the first to know if a safety sensor has been activated or if the boat has moved. The internal GPS sensor is updated every 15 or 30 minutes, depending on energy consumptio n, and sends text alerts1 if the boat leaves the geofented area. Monitor Receive updates1 on the state of the boat's battery, the activity of the bilge pump, electricity in port, temperature changes and much more. Configure alarm notifications in the ActiveCaptain app. Control Take control of your boat. Remotely control up to five relay switches directly from the OnDeck hub and the ActiveCaptain app for the main integrated systems, which include battery chargers, ice generators and much more. You can also control as many switches as you need thanks to the compatibility with NMEA 2000 momentary or dimmable-close switches through EmpiriBus digital switching or third-party interfaces. Activecaptain app Download the ActiveCaptain app on a compatible smartphone and start managing the boat. You will be able to configure alarm notifications, take control of the boat and much more. Data storage Securely collect the boat's data through the Hub OnDeck and store it in the cloud for a maximum of 30 days. ALWAYS-ACTIVE Connection The hub employs global 3G/4G coverage. Auxiliary battery An auxiliary internal battery allows access to the OnDeck hub for a maximum of 48 hours even if the boat's battery is dead or the power is disconnected. To the services To maintain the connection with the boat, a subscription plan is required. Choose between an annual plan or a monthly plan. Complete integration The OnDeck system is an optimized incorporation to your current nautical electronic devices (MFD through a Garmin network, NMEA 2000® engines and sensors). Specifications: Misc General Dimensions without the antennas 23,1 X 4,9 X 14,2 cm Dimensions with the antennas pointing upwards 23,1 X 13,2 X 14,2 cm Dimensions with the antennas parallel to the assembly 23,1 X 4,9 X 21,5 cm Weight 0,64 kg Energy consumption 20 W maximum at 10 V of DC Input voltage range From 10 to 32 V of CC Battery autonomy Up to 48 hours Frequency of supervision 15 minutes Connectivity Compatible with NMEA 2000® Yes Compatible con ActiveCaptain Yes Mobile connectivity Yes (3G/4G) Wi-Fi® Yes Red Garmin Yes Sensors Setina pump Yes (2) Security Yes Battery voltage Yes (2) Temperature Yes Electricity in port Yes GPS location Yes Distance recording Yes NMEA 2000 Sensors Level of liquid Yes Temperature Yes Depth of the water Yes Position Yes Journey on land Yes Speed on the ground Yes Speed of the boat Yes Wind data Yes Fuel flow speed Yes Engine hours Yes Engine warning indicators Yes Switch controls Relay switch Yes (5) Alarms Temperature Yes Geovalla Yes Offline Yes Voltage Yes Electricity in port Yes Security sensor Yes Depth Yes FAQs What location requirements must be met for mounting the OnDeck Hub?Install above the waterline, avoid exposure to extreme temperatures, and maintain at least 102 mm (4 in.) from cables or interference sources. How should a relay switch be installed to control external devices?Connect the IN/OUT harness relay wire to the relay control, ensuring the relay is dry-mounted and powered from the same source as the OnDeck Hub. What safety precautions should I take before installation?Disconnect the vessel's power before installing. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. How can I prevent interference during installation?Mount at least 102 mm (4 in.) from other cables and sources of interference. What maintenance should be done for unused connectors?Cover unused connectors with weather caps to prevent corrosion of metal contacts. Where should the device be installed for best performance?Mount the device above the waterline, with access to ventilation and away from extreme temperatures. Ensure a clear view of the sky for GPS and cellular. How should the antennas be installed and oriented?Orient both antennas toward the sky—parallel to the device if mounted vertically, perpendicular if mounted horizontally, finger tight plus 45 degrees torque. How do I correctly connect the device to the battery?Connect red power wire to battery positive and black wire to negative, securing all connections tightly. Never bypass the in-line fuse. Are there special considerations for the ground wire?If all DC systems share a common negative, connect ground directly. If wiring allows isolation, connect to the network devices' negative instead. Are specific precautions needed for mounting on fiberglass surfaces?Yes, use a countersink bit to drill through only the gel-coat top layer to avoid cracking when tightening screws. How should bare wire connections be protected?Make sure bare wire connections are water tight using heat-shrink type connectors or other water-tight methods if exposed to moisture. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What location requirements must be met for mounting the OnDeck Hub?", "acceptedAnswer": {"@type": "Answer", "text": "Install above the waterline, avoid exposure to extreme temperatures, and maintain at least 102 mm (4 in.) from cables or interference sources."}}, {"@type": "Question", "name": "How should a relay switch be installed to control external devices?", "acceptedAnswer": {"@type": "Answer", "text": "Connect the IN/OUT harness relay wire to the relay control, ensuring the relay is dry-mounted and powered from the same source as the OnDeck Hub."}}, {"@type": "Question", "name": "What safety precautions should I take before installation?", "acceptedAnswer": {"@type": "Answer", "text": "Disconnect the vessel's power before installing. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding."}}, {"@type": "Question", "name": "How can I prevent interference during installation?", "acceptedAnswer": {"@type": "Answer", "text": "Mount at least 102 mm (4 in.) from other cables and sources of interference."}}, {"@type": "Question", "name": "What maintenance should be done for unused connectors?", "acceptedAnswer": {"@type": "Answer", "text": "Cover unused connectors with weather caps to prevent corrosion of metal contacts."}}, {"@type": "Question", "name": "Where should the device be installed for best performance?", "acceptedAnswer": {"@type": "Answer", "text": "Mount the device above the waterline, with access to ventilation and away from extreme temperatures. Ensure a clear view of the sky for GPS and cellular."}}, {"@type": "Question", "name": "How should the antennas be installed and oriented?", "acceptedAnswer": {"@type": "Answer", "text": "Orient both antennas toward the sky—parallel to the device if mounted vertically, perpendicular if mounted horizontally, finger tight plus 45 degrees torque."}}, {"@type": "Question", "name": "How do I correctly connect the device to the battery?", "acceptedAnswer": {"@type": "Answer", "text": "Connect red power wire to battery positive and black wire to negative, securing all connections tightly. Never bypass the in-line fuse."}}, {"@type": "Question", "name": "Are there special considerations for the ground wire?", "acceptedAnswer": {"@type": "Answer", "text": "If all DC systems share a common negative, connect ground directly. If wiring allows isolation, connect to the network devices' negative instead."}}, {"@type": "Question", "name": "Are specific precautions needed for mounting on fiberglass surfaces?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, use a countersink bit to drill through only the gel-coat top layer to avoid cracking when tightening screws."}}, {"@type": "Question", "name": "How should bare wire connections be protected?", "acceptedAnswer": {"@type": "Answer", "text": "Make sure bare wire connections are water tight using heat-shrink type connectors or other water-tight methods if exposed to moisture."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more