Garmin STRIKER Vivid 4cv

SailRACE Verified independent store

→

Observe the fish and structures with the highest level of detail after choosing the color of the screen, the location and the probe for your day in the water with the STRIKER Vivid Probe. Probe of Great Clarity and Color Choose from 7 new intense color options to see both fish and structures with the highest level of contrast and clarity in your 4-inch probe. Integrated Probe Use the included GT20 transducer to obtain the traditional CHIRP probe and the Garmin CHIRP ClearVü scanning probe. Marking of Waypoints To catch more fish, you need to know the best locations. Use the waypoint marking to easily find the best fishing points again. High Sensitivity GPS Plan and create routes, and visualize the speed of your boat on the probe using the high-sensitivity GPS. Quickdraw Contours No one knows the waters in which you fish better than you do. With the STRIKER Vivid 4cv probe, you can store up to 8,000 square kilometers of maps with contours of 30 centimeters. Mounting Components Included The STRIKER Vivid 4cv probe includes a rotating/tilting support in addition to components and a mounting cable for stern mirror and motor for trolling fishing. Specifications: Physical And Performance Characteristics Dimensions of the Unit (WIDTH/HEIGHT/DEPTH) 4CV: 9,8 X 17,4 X 4,5 cm (3,9'' X 6,9'' X 1,8'') 5CV: 18,8 X 11,6 X 5,4 cm (7,4” X 4,5” X 2,1”) 7CV: 9,3” X 5,5” X 2,3” (23,5 X 14,0 X 5,8 cm) 9CV:11,1” X 6,5” X 2,4” (28,2 X 16,5 X 6,0 cm) Weight 4CV: 0,3 kg (0,7 lb) 5CV: 0,5 kg (1,0 lb) 7CV: 0,8 kg (1,7 lb) 9CV: 1,1 kg (2,4 lb) Water Resistance Classification IPX7 Type of Screen 4CV: QSVGA 5CV, 7CV, 9CV: WVGA in color Screen Size (WIDTH/HIGH) 4CV: 2.1" X 3.7" (5.4 X 9.5 cm); 4.3" Diag, (10.9 cm) 5CV: 2.6" X 4.3" (6.5 X 10.8 cm); 5.0" Diag (12.8 cm) 7CV: 3.4" X 6.1" (8.6 X 15.4 cm); 7.0" Diag (17.8 cm) 9CV: 4.4" X 7.8" (11.2 X 19.8 cm); 9.0" Diag (22.8 cm) Screen Resolution (WIDTH/HIGH) 4CV: 272 X 480 pixels 5CV: 800 X 480 pixels 7CV: 800 X 480 pixels 9CV: 800 X 480 pixels Assembly Options flush, tilt/swivel Screen Keys With keys Maps And Memory Waypoints 5000 Track Points 50,000 Tracks 50 Routes 100 Sensors GPS Yes BUILT-IN Receiver Yes Compatible with Waas Yes Optional Map Support Garmin Quickdraw Contours Yes Electric Feeding Input 12 to 20 Vdc Typical Current Consumption 4CV - 5CV: 0.40 A 7CV: 0.67 A 9CV: 0.75 A Maximum Current Consumption 1.5 A Energy Consumption 4CV: 4.8 5CV: 4.8 7CV: 8.0 9CV: 9.0 Probe Specifications And Functions Show the Probe Yes Traditional Probe (Dual PROBE/DUAL Frequency) Built-in CLEARVÜ Yes Frequency Traditional: 50/77/200 kHz CHIRP (high and medium frequency) ClearVü: 260/455/800 kHz Transmission Power 4CV: 300 W (Rms) 5CV, 7CV, 9CV: 500 W (Rms) Blocking in the Background (Shows the Signals You Return From the Background to the Surface) Yes Graph and Record of Water Temperature Yes Connections Ports for 4-PIN Transducer 4CV: 1 CV:1 7CV: 1 9CV: 2 Garmin's WI-FI® Network (Local Connection) 4CV: No 5CV: No 7CV: Yes 9CV: Yes Functions Of Fishfinder SPLIT-SCREEN Zoom Yes Fish Symbol (Helps to Identify Fish) Yes Automatic Gain Technology (Allows You to Obtain Detailed Images of Structures and Densities of the Background) Yes Adjustable Depth Line (Measures the Depth of Objects Underwater) Yes A-SCOPE (Shows in Real Time the Fish That Pass Through the Beam Transducer) Yes Temperature Sensor Included Yes Customized Depth Scale Yes Additional Additional Features 4CV: A port for a 4-pin transducer Contornos de dibujo rápido GPS Integrated Marking waypoints GPS Direction (COG) Current consumption at 12 V: 0.40 A 5CV: A port for a 4-pin transducer Quickdraw Contours Integrated GPS Marking waypoints GPS Direction (COG) Current consumption at 12 V: 0.40 A 7CV: A port for a 4-pin transducer A port for 4-pin SideVü transducer Wireless connectivity: yes Quickdraw Contours Integrated GPS Marking waypoints GPS Direction (COG) 12 V current consumption: 0.67 A 9CV: A port for a 4-pin transducer A port for 4-pin SideVü transducer Wireless connectivity: yes Quickdraw Contours Integrated GPS Marking waypoints GPS Direction (COG) Current consumption at 12 V: 0.75 A FAQs Can the transducer cable be cut or shortened for installation?No, cutting the transducer cable will void your warranty and is not recommended. Should marine sealant be used during transducer installation?Yes, apply marine sealant to all screw threads to prevent water seepage into the transom. What should I do if I experience installation difficulty?If you encounter installation difficulties, refer to your product manual or Garmin support resources. Who should perform the transducer installation?Installation should be carried out by a qualified marine installer. How do I prevent gel-coat cracking when mounting on fiberglass?Use a countersink bit to drill a clearance counterbore in the gel-coat before installing screws. What should I do to prevent marine growth on the transducer?Lightly sand the transducer and mounting hardware, wipe with isopropyl alcohol, and coat with water-based anti-fouling paint. What bracket types can be used to mount the transducer?You can use the included transom or trolling motor mount brackets. How do you prepare the transducer for long-term water exposure?Lightly sand, clean with isopropyl alcohol, then apply water-based anti-fouling paint to the transducer and mounting hardware. Can I cut or modify the transducer cable?No, do not cut the transducer cable. Cutting the transducer cable will void your warranty. Where should the transducer be mounted on the transom?The transducer should be as close to the centerline as possible and at least 38 cm (15 in.) from the propeller. How should the transducer cable be routed to avoid interference?Route the cable away from ignition wires, batteries, and high-energy wires to ensure peak performance with lowest noise/interference. What material should NOT be used to clean the transducer?Do not use acetone or acetone-based products on the transducer. How deep below the hull should the transducer be positioned?For fiberglass hulls, extend it 3.5 mm (0.125 in.); for aluminum, 10 mm (0.375 in.) below the hull. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Can the transducer cable be cut or shortened for installation?", "acceptedAnswer": {"@type": "Answer", "text": "No, cutting the transducer cable will void your warranty and is not recommended."}}, {"@type": "Question", "name": "Should marine sealant be used during transducer installation?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, apply marine sealant to all screw threads to prevent water seepage into the transom."}}, {"@type": "Question", "name": "What should I do if I experience installation difficulty?", "acceptedAnswer": {"@type": "Answer", "text": "If you encounter installation difficulties, refer to your product manual or Garmin support resources."}}, {"@type": "Question", "name": "Who should perform the transducer installation?", "acceptedAnswer": {"@type": "Answer", "text": "Installation should be carried out by a qualified marine installer."}}, {"@type": "Question", "name": "How do I prevent gel-coat cracking when mounting on fiberglass?", "acceptedAnswer": {"@type": "Answer", "text": "Use a countersink bit to drill a clearance counterbore in the gel-coat before installing screws."}}, {"@type": "Question", "name": "What should I do to prevent marine growth on the transducer?", "acceptedAnswer": {"@type": "Answer", "text": "Lightly sand the transducer and mounting hardware, wipe with isopropyl alcohol, and coat with water-based anti-fouling paint."}}, {"@type": "Question", "name": "What bracket types can be used to mount the transducer?", "acceptedAnswer": {"@type": "Answer", "text": "You can use the included transom or trolling motor mount brackets."}}, {"@type": "Question", "name": "How do you prepare the transducer for long-term water exposure?", "acceptedAnswer": {"@type": "Answer", "text": "Lightly sand, clean with isopropyl alcohol, then apply water-based anti-fouling paint to the transducer and mounting hardware."}}, {"@type": "Question", "name": "Can I cut or modify the transducer cable?", "acceptedAnswer": {"@type": "Answer", "text": "No, do not cut the transducer cable. Cutting the transducer cable will void your warranty."}}, {"@type": "Question", "name": "Where should the transducer be mounted on the transom?", "acceptedAnswer": {"@type": "Answer", "text": "The transducer should be as close to the centerline as possible and at least 38 cm (15 in.) from the propeller."}}, {"@type": "Question", "name": "How should the transducer cable be routed to avoid interference?", "acceptedAnswer": {"@type": "Answer", "text": "Route the cable away from ignition wires, batteries, and high-energy wires to ensure peak performance with lowest noise/interference."}}, {"@type": "Question", "name": "What material should NOT be used to clean the transducer?", "acceptedAnswer": {"@type": "Answer", "text": "Do not use acetone or acetone-based products on the transducer."}}, {"@type": "Question", "name": "How deep below the hull should the transducer be positioned?", "acceptedAnswer": {"@type": "Answer", "text": "For fiberglass hulls, extend it 3.5 mm (0.125 in.); for aluminum, 10 mm (0.375 in.) below the hull."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more