Garmin STRIKER Vivid 7cv

SailRACE Verified independent store

→

Observe the fish and structures with the highest level of detail after choosing the color of the screen, the location and the probe for your day in the water with the STRIKER Vivid Probe. Probe of Great Clarity and Color Choose from 7 new intense color options to see both fish and structures with the highest level of contrast and clarity in your 4-inch probe. Integrated Probe Use the included GT20 transducer to obtain the traditional CHIRP probe and the Garmin CHIRP ClearVü scanning probe. Marking of Waypoints To catch more fish, you need to know the best locations. Use the waypoint marking to easily find the best fishing points again. High Sensitivity GPS Plan and create routes, and visualize the speed of your boat on the probe using the high-sensitivity GPS. Quickdraw Contours No one knows the waters in which you fish better than you do. With the STRIKER Vivid 4cv probe, you can store up to 8,000 square kilometers of maps with contours of 30 centimeters. Mounting Components Included The STRIKER Vivid 4cv probe includes a rotating/tilting support in addition to components and a mounting cable for stern mirror and motor for trolling fishing. Specifications: Physical And Performance Characteristics Dimensions of the Unit (WIDTH/HEIGHT/DEPTH) 4CV: 9,8 X 17,4 X 4,5 cm (3,9'' X 6,9'' X 1,8'') 5CV: 18,8 X 11,6 X 5,4 cm (7,4” X 4,5” X 2,1”) 7CV: 9,3” X 5,5” X 2,3” (23,5 X 14,0 X 5,8 cm) 9CV:11,1” X 6,5” X 2,4” (28,2 X 16,5 X 6,0 cm) Weight 4CV: 0,3 kg (0,7 lb) 5CV: 0,5 kg (1,0 lb) 7CV: 0,8 kg (1,7 lb) 9CV: 1,1 kg (2,4 lb) Water Resistance Classification IPX7 Type of Screen 4CV: QSVGA 5CV, 7CV, 9CV: WVGA in color Screen Size (WIDTH/HIGH) 4CV: 2.1" X 3.7" (5.4 X 9.5 cm); 4.3" Diag, (10.9 cm) 5CV: 2.6" X 4.3" (6.5 X 10.8 cm); 5.0" Diag (12.8 cm) 7CV: 3.4" X 6.1" (8.6 X 15.4 cm); 7.0" Diag (17.8 cm) 9CV: 4.4" X 7.8" (11.2 X 19.8 cm); 9.0" Diag (22.8 cm) Screen Resolution (WIDTH/HIGH) 4CV: 272 X 480 pixels 5CV: 800 X 480 pixels 7CV: 800 X 480 pixels 9CV: 800 X 480 pixels Assembly Options flush, tilt/swivel Screen Keys With keys Maps And Memory Waypoints 5000 Track Points 50,000 Tracks 50 Routes 100 Sensors GPS Yes BUILT-IN Receiver Yes Compatible with Waas Yes Optional Map Support Garmin Quickdraw Contours Yes Electric Feeding Input 12 to 20 Vdc Typical Current Consumption 4CV - 5CV: 0.40 A 7CV: 0.67 A 9CV: 0.75 A Maximum Current Consumption 1.5 A Energy Consumption 4CV: 4.8 5CV: 4.8 7CV: 8.0 9CV: 9.0 Probe Specifications And Functions Show the Probe Yes Traditional Probe (Dual PROBE/DUAL Frequency) Built-in CLEARVÜ Yes Frequency Traditional: 50/77/200 kHz CHIRP (high and medium frequency) ClearVü: 260/455/800 kHz Transmission Power 4CV: 300 W (Rms) 5CV, 7CV, 9CV: 500 W (Rms) Blocking in the Background (Shows the Signals You Return From the Background to the Surface) Yes Graph and Record of Water Temperature Yes Connections Ports for 4-PIN Transducer 4CV: 1 CV:1 7CV: 1 9CV: 2 Garmin's WI-FI® Network (Local Connection) 4CV: No 5CV: No 7CV: Yes 9CV: Yes Functions Of Fishfinder SPLIT-SCREEN Zoom Yes Fish Symbol (Helps to Identify Fish) Yes Automatic Gain Technology (Allows You to Obtain Detailed Images of Structures and Densities of the Background) Yes Adjustable Depth Line (Measures the Depth of Objects Underwater) Yes A-SCOPE (Shows in Real Time the Fish That Pass Through the Beam Transducer) Yes Temperature Sensor Included Yes Customized Depth Scale Yes Additional Additional Features 4CV: A port for a 4-pin transducer Contornos de dibujo rápido GPS Integrated Marking waypoints GPS Direction (COG) Current consumption at 12 V: 0.40 A 5CV: A port for a 4-pin transducer Quickdraw Contours Integrated GPS Marking waypoints GPS Direction (COG) Current consumption at 12 V: 0.40 A 7CV: A port for a 4-pin transducer A port for 4-pin SideVü transducer Wireless connectivity: yes Quickdraw Contours Integrated GPS Marking waypoints GPS Direction (COG) 12 V current consumption: 0.67 A 9CV: A port for a 4-pin transducer A port for 4-pin SideVü transducer Wireless connectivity: yes Quickdraw Contours Integrated GPS Marking waypoints GPS Direction (COG) Current consumption at 12 V: 0.75 A FAQs Can I print my own mounting template for installation?It is not recommended to print your own template; use the template provided in the product box for accurate sizing. What is the minimum compass safe distance for installation?Maintain a safe distance of at least 30 cm (11.81 in.) from the compass during installation. How should I seal the installation holes for the transducer?Apply marine sealant to all screw threads and the pass-through cable hole to prevent water from seeping into the transom. What maintenance should be performed on the transducer if the boat remains in water long-term?Coat the transducer and hardware with water-based anti-fouling paint to prevent marine growth. Should the software be updated after installing the transducer?Yes, you must update Garmin chartplotter software after installation. Where should the transducer be installed for best performance?Mount as close to the centerline of the transom as possible, in clean (non-turbulent) water, following all mounting considerations. What is the proper orientation of the transducer during mounting?The transducer should be mounted parallel to the water line for optimal performance. Can the transducer cable be cut if it's too long?No, cutting the transducer cable voids your warranty. What side of the transom should the transducer be mounted if the propeller turns clockwise?Mount the transducer on the starboard (right) side. Can the transducer cable be routed with other electrical wires?Avoid routing the cable close to electrical wires or sources of electrical interference for peak performance. How is the transducer attached to a trolling motor?Secure the mount with hose clamps around the motor body, ensuring the transducer is parallel to the bottom when in use. How should I adjust the depth of the transducer for best signal?Make adjustments in small increments. Placing the transducer too deep can affect boat performance and risk damage. What safety responsibility does the user have when operating the vessel?You are responsible for the safe and prudent operation of your vessel. The device is a tool to assist, not replace, safe operation. What type of paint should be used on the transducer for long-term water exposure?Only water-based anti-fouling paint should be used on the transducer and hardware to prevent marine growth. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Can I print my own mounting template for installation?", "acceptedAnswer": {"@type": "Answer", "text": "It is not recommended to print your own template; use the template provided in the product box for accurate sizing."}}, {"@type": "Question", "name": "What is the minimum compass safe distance for installation?", "acceptedAnswer": {"@type": "Answer", "text": "Maintain a safe distance of at least 30 cm (11.81 in.) from the compass during installation."}}, {"@type": "Question", "name": "How should I seal the installation holes for the transducer?", "acceptedAnswer": {"@type": "Answer", "text": "Apply marine sealant to all screw threads and the pass-through cable hole to prevent water from seeping into the transom."}}, {"@type": "Question", "name": "What maintenance should be performed on the transducer if the boat remains in water long-term?", "acceptedAnswer": {"@type": "Answer", "text": "Coat the transducer and hardware with water-based anti-fouling paint to prevent marine growth."}}, {"@type": "Question", "name": "Should the software be updated after installing the transducer?", "acceptedAnswer": {"@type": "Answer", "text": "Yes, you must update Garmin chartplotter software after installation."}}, {"@type": "Question", "name": "Where should the transducer be installed for best performance?", "acceptedAnswer": {"@type": "Answer", "text": "Mount as close to the centerline of the transom as possible, in clean (non-turbulent) water, following all mounting considerations."}}, {"@type": "Question", "name": "What is the proper orientation of the transducer during mounting?", "acceptedAnswer": {"@type": "Answer", "text": "The transducer should be mounted parallel to the water line for optimal performance."}}, {"@type": "Question", "name": "Can the transducer cable be cut if it's too long?", "acceptedAnswer": {"@type": "Answer", "text": "No, cutting the transducer cable voids your warranty."}}, {"@type": "Question", "name": "What side of the transom should the transducer be mounted if the propeller turns clockwise?", "acceptedAnswer": {"@type": "Answer", "text": "Mount the transducer on the starboard (right) side."}}, {"@type": "Question", "name": "Can the transducer cable be routed with other electrical wires?", "acceptedAnswer": {"@type": "Answer", "text": "Avoid routing the cable close to electrical wires or sources of electrical interference for peak performance."}}, {"@type": "Question", "name": "How is the transducer attached to a trolling motor?", "acceptedAnswer": {"@type": "Answer", "text": "Secure the mount with hose clamps around the motor body, ensuring the transducer is parallel to the bottom when in use."}}, {"@type": "Question", "name": "How should I adjust the depth of the transducer for best signal?", "acceptedAnswer": {"@type": "Answer", "text": "Make adjustments in small increments. Placing the transducer too deep can affect boat performance and risk damage."}}, {"@type": "Question", "name": "What safety responsibility does the user have when operating the vessel?", "acceptedAnswer": {"@type": "Answer", "text": "You are responsible for the safe and prudent operation of your vessel. The device is a tool to assist, not replace, safe operation."}}, {"@type": "Question", "name": "What type of paint should be used on the transducer for long-term water exposure?", "acceptedAnswer": {"@type": "Answer", "text": "Only water-based anti-fouling paint should be used on the transducer and hardware to prevent marine growth."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more