Use this Garmin power cable to deliver the required power or combined power/data connection for the compatible Garmin marine system.Reference: Soporte de barco con alimentación Designed for the compatible Garmin device family referenced in the title. Useful for replacement, service, or a new installation where the correct Garmin cabling is required. FAQs What should be done with unconnected wires during installation?Insulate and safely secure any unconnected wire on your boat. What are the safety precautions for installation?Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during installation. Who should install this power/data cable?It is strongly recommended that an experienced installer with proper electrical system knowledge perform the installation. How can I adjust the orientation of the cradle once installed?After installation, the bracket can be rotated left or right until the desired angle is set, and then tightened. What power source voltage is required for this Garmin mount?The mount should be connected to a main power source supplying 10 to 50 Volts. Does the kit include mounting hardware?No, hardware for the swivel mount (3 bolts or screws) is not included and must be sourced separately. Can countersunk head screws be used for mounting?No, using screws with countersunk heads may damage the mounting bracket; use pan-head machine bolts or self-tapping screws. Is it safe to leave wires disconnected?No. Any unconnected wire must be insulated and safely secured to avoid hazards. Is overtightening the mounting screws advised?No, do not overtighten the screws or bolts, as this may damage the swivel base. What should be done before mounting the device?Ensure the metal contacts on the device and mount are dry to avoid damage and use the weather cap if not mounted. What wire color connections are used for serial data?Yellow is the serial input wire, blue is serial output, and green is serial ground. What should be done if the device contacts are wet before mounting?Ensure metal contacts on device and mount are dry before mounting to avoid damage. What hardware sizes are recommended for mounting?Use #8 (4 mm) pan-head bolts with 5/32 in. drill bit or pan-head self-tapping screws with 1/16 in. drill bit for pilot holes. How do you secure the device to deter theft after mounting?Use the security screw tool to tighten the security screw on top of the mount after snapping the device into place. What is the warranty for this accessory?Garmin’s standard limited warranty applies to this accessory. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What should be done with unconnected wires during installation?", "acceptedAnswer": {"@type": "Answer", "text": "Insulate and safely secure any unconnected wire on your boat."}}, {"@type": "Question", "name": "What are the safety precautions for installation?", "acceptedAnswer": {"@type": "Answer", "text": "Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding during installation."}}, {"@type": "Question", "name": "Who should install this power/data cable?", "acceptedAnswer": {"@type": "Answer", "text": "It is strongly recommended that an experienced installer with proper electrical system knowledge perform the installation."}}, {"@type": "Question", "name": "How can I adjust the orientation of the cradle once installed?", "acceptedAnswer": {"@type": "Answer", "text": "After installation, the bracket can be rotated left or right until the desired angle is set, and then tightened."}}, {"@type": "Question", "name": "What power source voltage is required for this Garmin mount?", "acceptedAnswer": {"@type": "Answer", "text": "The mount should be connected to a main power source supplying 10 to 50 Volts."}}, {"@type": "Question", "name": "Does the kit include mounting hardware?", "acceptedAnswer": {"@type": "Answer", "text": "No, hardware for the swivel mount (3 bolts or screws) is not included and must be sourced separately."}}, {"@type": "Question", "name": "Can countersunk head screws be used for mounting?", "acceptedAnswer": {"@type": "Answer", "text": "No, using screws with countersunk heads may damage the mounting bracket; use pan-head machine bolts or self-tapping screws."}}, {"@type": "Question", "name": "Is it safe to leave wires disconnected?", "acceptedAnswer": {"@type": "Answer", "text": "No. Any unconnected wire must be insulated and safely secured to avoid hazards."}}, {"@type": "Question", "name": "Is overtightening the mounting screws advised?", "acceptedAnswer": {"@type": "Answer", "text": "No, do not overtighten the screws or bolts, as this may damage the swivel base."}}, {"@type": "Question", "name": "What should be done before mounting the device?", "acceptedAnswer": {"@type": "Answer", "text": "Ensure the metal contacts on the device and mount are dry to avoid damage and use the weather cap if not mounted."}}, {"@type": "Question", "name": "What wire color connections are used for serial data?", "acceptedAnswer": {"@type": "Answer", "text": "Yellow is the serial input wire, blue is serial output, and green is serial ground."}}, {"@type": "Question", "name": "What should be done if the device contacts are wet before mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Ensure metal contacts on device and mount are dry before mounting to avoid damage."}}, {"@type": "Question", "name": "What hardware sizes are recommended for mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Use #8 (4 mm) pan-head bolts with 5/32 in. drill bit or pan-head self-tapping screws with 1/16 in. drill bit for pilot holes."}}, {"@type": "Question", "name": "How do you secure the device to deter theft after mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Use the security screw tool to tighten the security screw on top of the mount after snapping the device into place."}}, {"@type": "Question", "name": "What is the warranty for this accessory?", "acceptedAnswer": {"@type": "Answer", "text": "Garmin’s standard limited warranty applies to this accessory."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]}
Related
Related
Related
Related