Multifunctional programmable 3rd generation MOSFET. The system has 10 functions; its latest feature is the 3-rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment. It protects Li-Ion batteries: LiPoly and LiFePO4. It has a built-in active brake and it protects contacts against damage. The Smart Trigger function enables achieving faster trigger response. Thanks to two operating modes, the system works with both the original and the modified AEG installation. The system is designed for all replicas and especially for the upgraded ones. It has been adapted to work even with the most powerful springs, including M170. In SEMI Mode, the brake does not allow for compressing a piston after a shot. The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts. Gate know how important reliability is on the battlefield. That’s why the unit has thermal protection. In tandem with a time-lag fuse, it fully protects your AEG installation. The microprocessor monitors the battery voltage constantly and provides protection against over-discharge of the battery. Rate of fire control ensures there is no loss of the rifle’s rate of fire, so you can use stronger LiPo batteries, and still have ROF just like in a real gun. Burst mode enables you to make 3-shot series. In this way you can save ammunition and increase the realism. You can change AUTO mode to BURST mode or SEMI* mode to BURST mode. The function gives you the option to program your fire selector. There are five modes: - STOCK WIRING SEMI/AUTO - STOCK WIRING SEMI/BURST - MODIFIED WIRING SEMI/AUTO - MODIFIED WIRING SEMI/BURST - MODIFIED WIRING BURST/AUTO Operating modes: Plug&Play: All you need to do is connect the system between the battery and the rifle. Enhanced Mode: It requires modification of AEG installation. We connect trigger contacts to MERF 3.2. We can do it using the signal wire attached to the kit. Included in the kit: MERF 3.2 Additional kit of Deans-T Connectors Single signal wire for trigger contacts Double signal wire for trigger contacts Programming button Full specification available on Gate's website: https://www.gatee.eu/merf32
