These parts are for the Element RC Gatekeeper Truck. This is a purchase of Physically printed parts. These parts are printed when ordered and can take 1 - 10 days to ship depending on our current workload. Includes: 2 x Sail Panels Fuel Tube not included. Bed Cover and Drop Bed Inserts sold separately IMPORTANT READ: Dual Color ordering: The parts offered are a dual color print Example - BACKING COLOR = Black, SURFACE COLOR = Red, SINGLE COLOR PARTS = BLACK You are selecting the Backing (Color of the back of the Bed Side Insert) and the Surface (Color of the part you see from the side of the truck. Look at the renderings for color example. To install the Bed components, you must do it in the following order. Glue/Zip sail panel in place. Use 2x M3 studs (Not Provided) and nitro fuel tube (Not Provided) to mock fuel fill. Note: Zip Ties Must be Small (1.4x2.5mm Opening) Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts. IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely. Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.
