Gator Skin is an inorganic silicone penetrating protectant. Its inorganic silicone chemistry means that it is not broken down by natural elements. By deeply penetrating the substrate, it offers years of internal protection. Its breathable nature means it will not trap moisture and will prevent water penetration into the substrate, protecting it from the weather. Product Features Easy to apply Breathable Keeps a natural appearance Inorganic Protects the substrate by deeply penetrating Applications Use Gator Skin on any porous material that needs protection from the elements, such as: Natural Stone Bricks Wood Concrete Directions Before You Begin: Surfaces must be clean, dry and free of any contaminants before sealing. Gator Skin Repellent performance is directly related to how thoroughly the surfaced is prepared. All grease, oil and potential contaminates must be removed. Do not apply when the temperature of the air or the surface to be coated is below 50°F. Testing on your surface is always recommended to ensure desired results. Surface Preparation: Concrete should cure a minimum of 28 days before sealing. Read label instructions carefully. Cobble™ Clean, Cobble™ Prep, and Cobble™Oxhide may be used for specific cleaning situations. Mixing Instructions: Stir product Application: Apply with a lambs wool or microfiber cloth, working the material into the surface. Airless Sprayer: Spray by overlapping each pass. Always apply in an even film deposit and maintain a working wet line. Remove any excess material after 3-5 minutes. On Bare Surface: Apply to the surface and allow to penetrate for 3-5 minutes, remove any excess. Do not allow any excess or pooling to dry on the surface. Over Previously Sealed: Film-forming sealers will need to be stripped before application. Gator Skin Repellent may be applied over non film forming sealers provided the prior application is sufficiently worn away. Resources Technical Data Sheet
Related
Related
Related
Related