The Gemini UHF-4100HL: Single 100-Channel UHF Wireless System is designed for live sound reinforcement applications such as for DJs, presenters, fitness instructors, and houses of worship. The system consists of a single-channel UHF wireless receiver and one wireless beltpack transmitter with headset/lavalier microphone. The system allows you to transmit on 100 different UHF transmission channels and has a range of 250'. You can set your transmission frequency manually or let the system do it automatically. To prevent phasing problems, the system utilizes a specialized phase locked loop circuit. The front panel of the receiver features rotary volume control, buttons for group selection, channel selection, transmitter sync, and LED indicators for transmission channel, RF, and AF signal strength. The back of the unit features balanced XLR and unbalanced 1/4" outputs to make it easy to connect to different mixers and signal processors. This system comes included with one wireless beltpack transmitter with headset/lavalier microphone. Up to eight microphones can be connected within the transmission frequency band using multiple receivers. Each headset/lavalier microphone is built with a cardioid pickup pattern condenser element and utilizes foam inserts to minimize ambient noise and popping. Each includes a power on/off switch and will run for up to 8 hours on two AA batteries. Features Single UHF receiver with 250' range US: 100 operating frequencies between 682MHz and 698MHz EUR: 100 operating frequencies between 854MHz and 865MHz Allows up to 8 mics to be used simultaneously without interference Switchable automatic/manual frequency selection Phase Locked Loop (PLL) circuitry for increased reception RF and AF LED indicators for monitoring incoming signal strength Auto mute with built-in noise reduction Front panel output level control Balanced XLR and unbalanced 1/4" outputs Microphone On/Off switch Convertible, comfortable lightweight headset/lavalier mic with sensitivity and pop control Discreet, lightweight belt pack transmitter 100 Transmission Channels The system provides you with 100 channels on which to transmit Range of 250' The system can transmit up to 250' with optimal conditions Manual and Automatic Channel Selection You can manually select the transmission channel or have the receiver and transmitter sync automatically LED Indicators for RF, AF, and Channel The receiver features LED indicators for RF, AF, and channel selection Balanced XLR and Unbalanced 1/4" Outputs For connecting to different mixers and signal processors, the receiver features both balanced XLR and unbalanced 1/4" output connectors Up to 8 Hours Run Time On Two AA Each beltpack transmitter can run for up to 8 hours on two AA batteries Phase Lock Loop Circuit To prevent phasing problems, the receiver utilizes a phase lock loop circuit Specifications Receiver Frequency Range USA: 682 to 698 MHz Europe: 854 to 865 MHz Transmission Range: 250' (76.2 m) Receiving System: PLL synthesized Frequency Stability: ± 0.005% Frequency Response: 50 to 15,000 Hz ±3 dB Signal-to-Noise Ratio: 90 dB Modulation Mode: FM IF Frequency: 80.5 MHz THD: 1% at 1,000 Hz Sensitivity: 10 dBuV (FM: 40 kHz, S/N > 85 dB) Power Supply: 12 VDC Audio Output Balanced XLR Unbalanced 1/4" Dimensions (HxDxL): 1.8 x 5.43 x 8.27" (45 x 138 x 210 mm) Weight: Not specified by the manufacturer Transmitter RF Power Output: < 10 dBm Oscillation Mode: PLL Synthesized Spurious Emission: > 50 dB below carrier frequency Frequency Stability: 30.005% with quartz control Modulation: ± 60,000 Hz Current Consumption: 100 mA Battery Type: 2 x AA Alkaline Battery Life: 8 Hours Microphone Element: Condenser Polar Pattern: Cardioid Dimensions (W x D x H): 2.48 x 0.78 x 4.33" (63 x 20 x 110 mm) Weight: Not specified by the manufacturer
Related
Related
Related
Related