Superior Condition – 24″ Commercial Stainless Steel Drop-In Sink – Single-Compartment Deep Basin – Built-In Drain – Heavy-Duty Foodservice Construction🔹 ConditionUsed Equipment – Good Condition – Fully Inspected & Ready for InstallationThis commercial stainless steel drop-in sink has been visually inspected and appears structurally solid. The basin, surrounding rim, welded corners, rear raised edge, and drain opening are intact and ready for installation after normal cleaning and sanitizing.The stainless steel surfaces show cosmetic signs of prior commercial use, including scratches, scuffs, water marks, staining, and light surface wear. These imperfections are cosmetic and are consistent with normal restaurant or foodservice use.Because this is a non-powered plumbing fixture, no electrical operational testing is required. The drain connection should be inspected for compatibility and leak-tested by the installer after installation.🔹 DescriptionThis heavy-duty commercial drop-in sink provides a practical single-compartment washing, rinsing, soaking, preparation, or utility station for restaurants, bars, cafés, bakeries, catering facilities, concession operations, food trucks, and commercial kitchens.The photographed sink measures approximately 24 inches wide and 18 inches front-to-back, based on the tape measurements visible in the supplied photos. Its deep rectangular basin provides useful capacity for washing utensils, containers, barware, small cookware, ingredients, or food-preparation accessories.A broad self-rimming perimeter supports installation into a compatible stainless steel table, countertop, work station, bar counter, or custom cabinet opening. The integrated rear raised edge helps reduce water migration behind the sink and provides a finished commercial appearance.The centered drain opening allows the unit to connect to a compatible commercial drain assembly. A comparable commercial 24-inch by 18-inch drop-in sink commonly uses a deep stainless steel bowl and self-rimming installation design.🔹 DimensionsOverall Width: Approximately 24 inOverall Depth: Approximately 18 inOverall Height: Approximately 12 in – Estimate; confirm physicallyBasin Width: Approximately 20–21 in – Confirm physicallyBasin Depth, Front to Back: Approximately 14–16 in – Confirm physicallyBasin Vertical Depth: Approximately 10–12 in – Confirm physicallyDrain Opening: Approximately 3.5 in – Confirm physicallyThe overall width and front-to-back measurements are based on the measuring tape shown in the supplied photos. Final dimensions should be physically verified before preparing the countertop cutout.🔹 Plumbing SpecificationsFixture Type: Commercial drop-in sinkNumber of Compartments: 1Drain Configuration: Bottom drain openingFaucet: Not includedDrain Basket Assembly: Not included unless separately confirmedWater Connections: None built into the sinkInstallation Type: Drop-in / self-rimmingPower Required: NonePlumbing Installation: Required🔹 ConstructionHeavy-duty stainless steel constructionSingle deep rectangular basinCommercial welded constructionWide self-rimming perimeterIntegrated rear raised edgeRounded interior corners for easier cleaningSloped basin floor toward the drainCentered bottom drain openingEnclosed stainless steel exterior bodyDurable foodservice utility designCompatible with custom counters and stainless steel worktables🔹 Key FeaturesApproximately 24-inch-wide commercial designSingle-compartment deep basinSpace-efficient drop-in installationDurable stainless steel constructionBroad perimeter rim supports stable installationIntegrated drain openingRaised rear edge helps contain splashesSmooth basin supports easier routine sanitationNo electrical connection requiredSuitable for washing, rinsing, soaking, and preparationCan be installed in a compatible countertop or worktableIdeal for restaurant and bar support areas🔹 Recommended ApplicationsRestaurantsCommercial kitchensBars and loungesCoffee shopsCafésBakeriesFood trucksCatering facilitiesConcession standsPrep kitchensDishwashing support areasBarware washing stationsUtensil washing stationsUtility washing areasIngredient-rinsing stationsCustom stainless steel counters🔹 Brand and Model InformationManufacturer: Unbranded / Not IdentifiedBrand: Not visible in the supplied photosModel: Not availableEquipment Type: Commercial Single-Compartment Drop-In SinkMaterial: Stainless steelInstallation Type: Drop-in / self-rimmingNo manufacturer identification plate, logo, model number, or certification label is visible in the supplied photographs. The listing should remain unbranded unless additional identification is found on the underside or rear of the fixture.🔹 CertificationsNSF Certification: Not confirmedUL Certification: Not applicable to this non-powered plumbing fixtureOther Certifications: Not confirmedDo not advertise the sink as NSF certified unless a clear NSF marking or manufacturer data plate is found on the unit.🔹 IncludedOne commercial stainless steel drop-in sinkIntegrated single-compartment basinBuilt-in drain openingStainless steel exterior housing and perimeter rimUnit sold exactly as shown in the supplied photographs🔹 Not IncludedFaucetDrain basketDrain fittingDrain pipeP-trapWater-supply linesMounting clips or hardwareCountertop or worktableSoap dispenserAccessories or containers🔹 Important NotesUsed commercial foodservice equipmentVisible scratches, scuffs, staining, and surface wearClean and sanitize thoroughly before useDrain hardware is not shownFaucet is not includedInstallation requires a compatible counter openingVerify all measurements before cutting a countertopProfessional plumbing installation is recommendedLeak-test the drain connection after installationManufacturer and model are not identifiedSold exactly as photographedSold as-is, where-isNo manufacturer warranty includedShipping calculated at checkoutLocal pickup available