Gen V LT1 Engine Controller Kit 2014 - 2023+ GEN V LT1, LT4, L83, L84, L86, L87 & L8T 5.3 - 6.2 - 6.6 PARTS INCLUDED: Complete engine and transmission wiring Harness, Engine ECM, TCM (8 and 10 Speed only), Pedal (ACC-1007), O2 Sensors X2 (ACC-1039), MAF Sensor & Holder (ACC-1046, MAF-TUBE-4X4), ECM Mounting Bracket (ACC-1050), Instruction Manual All 6L80E/6L90E Controller Kits require your Customer Supplied TCM to be Mailed in for Tuning/Pairing Purposes. *Don't forget to Mail In your Customer Supplied T43 TCM (located inside your 6L80e transmission). ALL 8 + 10 SPEED TCM TUNING REQUIRES YOUR TUN (TRANSMISSION UNIQUE NUMBER) Without the TUN from your transmission you will experience shifting and communication errors. Warranties can not be honored without this information2019+ 10L90E & 8L90E transmissions are NOT supported CONNECTIONS FOR: Fuse/Relay Box Fuel Pump Control (Relay included) Fan controls (Fan Controller PAC-2800BT and Relays and fuse available separately KIT-1010) Check Engine Light, Speedo output, Tachometer, OBD2 Port Accelerator Pedal MAF Sensor MAP Sensor Engine Coolant Temp Alternator Control (2) Upstream Oxygen Sensors Crankshaft Position Camshaft Position Fuel Injectors Coil Packs Automatic or Manual Transmission control Knock Sensors NOTES: This COMPLETE controller kit from PSI includes everything you need to get that Gen 5 LT engine and Overdrive Transmission running in your project vehicle. Why use an aftermarket controller for your transmission when you can utilize the Factory controller just like the original vehicle! The kit includes hardware and components that don't typically come with used engines, such as the wiring harness, mass airflow meter WITH tube to drop sensor into, pedal, oxygen sensors, and programmed ECM/TCM - eliminating the need to source them separately. This controller system is a true stand-alone system for use in older vehicles, as all that's needed to get a vehicle running with it are power and ground sources, fuel pump and an electric cooling fan. These Harnesses are designed for retrofitting '14 - 22 LT1, L83, L84, L86, L87 & L8T ECOTEC3 GEN V 5.3L, 6.2L, and 6.6L engines and a 4, 6, 8, or 10 speed OR T56/TR6060 or non-electronic automatic transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Factory/OEM Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All Harnesses are 100% Quality Inspected prior to shipping. (Warning) This is a RACE ONLY product manufactured and sold for installation on vehicles to be used solely for competition purposes. Once this part is installed, the vehicle may never be used, or registered or licensed for use, on a public road or highway. If you install this part on your vehicle and use the vehicle on a public road or highway, you will violate the Clean Air Act 203(a)(3), 42 U.S.C, 7522(a)(3) and may be subject to personal civil or criminal liability.
Related
Related
Related
Related