NOCO GENPRO10X2 2-Bank 20A Onboard Battery Charger & Maintainer

PLP Battery Supply Verified independent store

→

2-Bank, 20-Amp On-Board Battery Charger (10-Amp Per Bank), Battery Maintainer, and Battery Desulfator with Temperature Compensation Meet the all-new GENPRO10X2. Similar to our GEN2 , only better. It's 19% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers we have ever made. A one-bank onboard battery charger rated at 20-amps (10-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries. • A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. • Charging modes - Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries. • Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates. • Charge dead batteries - Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts. • Restore your battery - Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life. • Beyond maintenance - It's not just a trickle charger, it's an advanced battery maintainer. A fully-automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge. • Redefined mounting - A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise. • Designed for water - A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater. • What's In the Box GENPRO10X2 On-Board Battery Charger (2) Self-Tapping Screws User Guide & Warranty Information Specifications Operating Requirements Line Voltage: 120V to 240V AC Frequency: 50Hz to 60Hz Operating Temperature: -4° to 104° F (-20° to 50° C) Storage Temperature: -22° to 140° F (-30° to 60° C) Relative Humidity: 0 to 95% Non-Condensing Charging Current: 10 Amps DC x 2 Banks Voltages: 12V Chemistry: Lead-Acid and Lithium Types: Wet, Gel, MF, CA, EFB, AGM, Lithium Battery Capacity Range: Up to 230 Amp-Hours Maintenance: All Battery Sizes Power Consumption: 150 Watts (Max) X 2 Banks Protection IP Rating: IP68 Safety Short-Circuit: Yes Open-Circuit: Yes Overheating: Yes Overcharge: Yes Spark-Proof: Yes Reverse Polarity: Yes Size Height: 6.5 Inches (165mm) Width: 8.1 Inches (207mm) Depth: 2.9 Inches (73mm) Weight: 8.74 Pounds (3.96kg) Cord Management DC Cable + Eyelet Length: 72 Inches (182cm) DC Cable Size: 14 AWG DC Fuse Size: 15 AMP MINI ® Blade Fuse AC Cable Length: 72 Inches (182cm) AC Cable Size: 18 AWG Oil, gas, grease, water, chemical, UV, abrasion resistant Limited Warranty 3-Year Limited Warranty Show more