The TAKER H743 BT 32Bit 65A STACK is the latest stack system developed by the GEPRC team. It features a high-performance STM32H743VIH6 chip with a Cortex-M7 core running at up to 480MHz, handling both racing and freestyle flights with ease. Its dual gyroscope setup, using MPU6000 and ICM42688-P, ensures precise control. With integrated Bluetooth for wireless parameter adjustments and a built-in 512MB black box, it’s well-equipped. It also offers eight motor output ports and is compatible with X8 models. Compatible with Betaflight, INAV, and Ardupilot, it ensures flexibility. The dual independent 5V@3A + [email protected] BEC ensures stable charging and motor voltage options. Features include seven UART ports, an integrated barometer, and plug-and-play functionality. With the TAKER H65_8S_32Bit 65A 4IN1 ESC, it delivers an exceptionally smooth flight experience. BL32 configurator available to download HERE Features 1. Adopts the high-performance STM32H743 as the main controller 2. Equipped with MPU6000 and 42688-P dual gyroscopes 3. 512MB high-capacity black box storage 4. Bluetooth parameter tuning 5. Plug-and-play, no soldering required 6. Integrated barometer 7. Features 7 UART ports 8. Independent BEC with [email protected] and 5V@3A outputs 9. Supports multiple firmware options 10. Equipped with the TAKER H65_8S_32Bit 65A 4IN1 ESC for a smooth flight experience Specifications TAKER H743 BT 32Bit 65A STACK FC model: TAKER H743 BT Flight Controller MCU: STM32H743 IMU: MPU6000 + ICM42688-P(dual gyro) Air Unit Connection: direct plug for DJI Air Unit Black Box: 512M onboard Bluetooth: Supported Barometer: Supported USB Interface: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC Output: 5V@3A,[email protected] dual BEC Target: GEPRC_TAKER_H743 Dimension: 38.5×38.5mm, mounting hole size 30.5×30.5mm Input Voltage: 3-6S LiPo UART Ports: 7 groups (UART3 fixed for Bluetooth) Power Filtering: Integrated LC filter Weight: 8.4g ESC Model: TAKER H65_8S_32Bit 65A 4IN1 ESC Input Voltage: 3-8S Lipo(STACK only supports 3-6S) Ammeter: Support Continue Current：65A Burst Current：70A（5 seconds） Support Protocol: Dshot 150/300/600 Size：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 15.8g Target: GEPRC_F4_4in1 Note: pre-installed with BL32 test firmware, extensively tested for safety and reliability(AM32 is also supported, customer flashing is required.target:AM32_AT32DEV_F421) Includes 1 x TAKER H743 BT Flight Controller 1 x TAKER H65_8S_32Bit 65A 4IN1 ESC 1 x Electrolytic capacitor(50V 1000uF) 1 x DJI connection cable(SH1.0 6pin 100mm) 1 x FC adapter cable(SH1.0 8pin 30mm) 1 x Receiver silicone cable(SH1.0 4pin 150mm) 1 x Camera connection cable(SH1.0-SH1.25 3pin 60mm) 1 x VTX connection cable(SH1.0 4pin-6pin 100mm) 1 x XT60 power cable(12AWG 110mm) 4 x M3*30 screws 4 x M3*25 screws 8 x Nylon nuts(M3) 12 x Silicone anti-shake pads(M3)
