Description The Glacia is an 880mm linear ceiling canopy in brass finish, designed to support three pendant lights from a single ceiling point. The rectangular metal plate measures 880mm long by 70mm wide with three cable exit points spaced evenly along the length, allowing pendants to be hung in a line rather than from separate ceiling roses. Linear canopies like the Glacia suit dining tables, kitchen islands and bar counters where multiple pendants need to hang in a row from a single ceiling joist position. The 880mm length works over tables 1600-2000mm long or kitchen islands 2000-2500mm long, typically with three pendants spaced 300-400mm apart along the canopy. The brass plate conceals the ceiling cut and wiring, while the three exit points allow each pendant cable to drop at the required spacing without visible surface wiring. The brass finish is a warm metallic coating over a steel base plate, providing both the structural rigidity to support three pendant fittings and a decorative finish that pairs with brass, gold or warm metallic pendant hardware. The 70mm projection from ceiling to bottom edge of the plate is shallow enough to sit close to the ceiling while still accommodating UK standard ceiling rose depth and wiring access. The canopy is supplied with fixing hardware for installation onto ceiling joists or battens. Specification Length (mm) 880 Projection (mm) 70 Warranty 5 Years Frequently Asked How many pendants can hang from this canopy? The Glacia has three cable exit points, so it supports up to three pendant lights. Each pendant needs its own cable and lampholder, sold separately. What size table or island does the 880mm length suit? The 880mm canopy works over dining tables 1600-2000mm long or kitchen islands 2000-2500mm long. For shorter tables or longer islands, Ideal Lux produces the Glacia in other lengths — contact us to check availability. How is it installed? The canopy fixes to ceiling joists or battens using the supplied mounting hardware. The mains supply cable enters through the centre of the plate, and the three pendant cables exit through pre-drilled apertures along the length. A qualified electrician should complete the installation to ensure compliance with UK wiring regulations. Does the brass finish match Ideal Lux pendant hardware? The brass tone is designed to coordinate with Ideal Lux brass and gold pendant fittings, but exact matching depends on the pendant range. If matching is critical, request a sample or check the pendant product images for finish compatibility.
