Glexo Diablo Cold Glue – Professional Cold Glue for Paintless Dent Repair Must read installation directions in box before application! GLEXO DIABLO COLD GLUE is a high-performance, pre-formed cold-glue compound engineered for professional paintless dent repair (PDR). It delivers outstanding initial tack, shape stability, and repeatable pull strength across a broad range of ambient conditions. Supplied pre-formed in silicone trays, it streamlines preparation and ensures consistent performance. Use with quality PDR tabs (Glexo tabs recommended) for best results. A typical package includes (package contents may vary by configuration): Silicone trays pre-filled with DIABLO glue Protective release film on the working face of each glue cavity/well User manual 3 strips with 6 lodgments per strip 18 lodgments in total (6-10mm, 6-15mm, 6-20mm) Note: Tabs and pull tools are not included with the glue and are sold separately. DIABLO is compatible with most metal-stem PDR tabs. Select a tab that fully covers or slightly exceeds the dent footprint to avoid inducing new deformation around the repair site. Preparation & Storage Guidelines For professional use only Store trays flat in their original packaging or another clean container Recommended storage temperature: 10–35 °C (50–95 °F) Acceptable short-term exposure: 4–45 °C (39–113 °F) Keep away from open flames and direct heat sources. Humidity does not affect storage Field-Proven Practical Tips Full coverage of the dent by the tab/glue face is critical for effective lift and minimizing collateral deformation DIABLO works across a wide ambient range; higher temperatures can improve adhesion but are not required Do not over-compress the glue when embedding the tab; excessive pressure can stretch the compound and reduce efficiency Cleaning, Reuse & Maintenance Keep prepared tabs clean and protected from dust; use release films or dust caps during storage If contaminated, gently warm the glue surface until it re-flows to a glossy finish; let cool to restore performance Residual glue on the vehicle can be removed with isopropyl alcohol or a suitable solvent NOTE: There is no warranty for glue product that has been installed improperly. Do not ingest; do not apply to skin. Keep away from children and animals. Avoid prolonged heating above 60 °C (140 °F). Keep away from open flames. Glexo Diablo Cold Glue – professional cold-glue system for Paintless Dent Repair. Extreme adhesion, repeatable pulls, pre-formed silicone storage, wide ambient performance, and easy maintenance for reliable PDR results.
