This listing is for the print ONLY- You will not receive the shirt Upgrade your wardrobe with our premium Hot Peel DTF (Direct to Film) Heat Transfers, perfect for vibrant, full-color prints on a wide range of materials. Whether you're working with cotton, polyester blends, non-sublimated polyester, wood, or acrylic, our DTF transfers deliver stunning results with durability and flexibility. ✅ Compatible with most materials✅ Vibrant, long-lasting color prints✅ Great for apparel, home décor, signs, and more Easy to Apply: Heat Press Settings Cotton & Blends: 315°F for 15 seconds Polyester: 300°F for 10 seconds 100% Thick Cotton: 315 for 20 seconds. Pressure: 60 PSI 2. Pre-Press Material Always pre-press your garment to remove moisture. Use the same time and temperature settings as your main press. 3. Place Transfer & Press Align your transfer on the garment and cover it with a Teflon sheet or parchment paper before pressing. 4. Hot Peel Transfer After pressing, wait 3–5 seconds, then grab a corner and peel the film away in one quick, smooth motion. 5. Finishing Press Place a Teflon sheet, film, or parchment paper over the design and press again.This step ensures the transfer is fully embedded into the fabric for a softer, longer-lasting finish. These instructions may vary depending on the material you are pressing. Always do a test first. Adjust as needed.