The SAFE-T-SWITCH SS-1 Primary Float Switch detects down stream clogs in condensate drains and interrupts the thermostat circuit to shut off the unit before flooding occurs. Works with Safe-T-Gard Model SG-1 condensate overflow alarm. The Model SS-1 installs inline at any downward slope from vertical to horizontal. It can also be installed on auxiliary pan outlets utilizing the plug included with the kit. PVC Tee body accepts a 3/4 inch slip PVC stub or drain pipe with included bushing. Compact footprint fits well in sloped drains and tight spaces. Features Sealed, waterproof reed/magnet float switch Potted electrical contacts for reliable performance in wet environments Float resets automatically and after the drain is cleared 6 ft. lead wires are pre-wired and sealed requiring one electrical connection during installation (usually within the air handler electrical cabinet) UL Listed to comply with UL 508 and most applicable building codes Tested and listed for use in a 24-volt circuit at 1.25 amps 6000 cycles by Underwriters Laboratories All fittings needed for installation on 3/4 inch drains and threaded female pan outlets and a plug for installation on auxiliary drain pan outlets. Switch/cap assembly that removes easily to facilitate cleaning or clearing of clogged lines. Specifications 24 Volts A/C 1.25 Amp GP Switching Current (Tested and Listed by UL at 6000 Cycles - Inductive Load) Reed Component Device is Separately UL Recognized at 2.5 Amps Max. Carry Current. Schedule 40 PVC Slip Fittings Accept 3/4 inch Stub or Drain Line.
