GoPoxy User Manual *Each tube includes 1 mixing nozzle* GoPoxy Tool Kit Required For Application.Don't have one? Grab it here - Gopoxy Toolkit Looking for white? Try our non-yellowing White Poly Grout – engineered for lasting brilliance. Ultimate Grout Solution GoPoxy ‘No Mess’ is the easy-to-use epoxy grout. It’s simple ‘peel-off’ formula saves hours compared with alternative epoxy grouts. Perfect for big floors, high footfall areas, bathrooms, showers, and any high-moisture areas, it cures to a solid, non-porous finish that helps resist water penetration, mold, and mildew growth. Why Choose GoPoxy? Easy Application: Simple peel-off formula, with little to no grout residue. Designed for effortless cleaning without the need for harsh detergents. Versatile: Works on walls and floors for ceramic and porcelain tiles. Waterproof & Durable: Ideal for high-moisture areas. Easy to Use: Pre-dosed for precision, eliminating mixing errors. Ensure to discard the first 30-40cm of Gopoxy to ensure the two components have mixed together. Mold-Resistant: Designed to help maintain clean, hygienic surfaces. Eco-Friendly: Resealable for future use. High Resistance to Staining: Provides uniform colour and easy maintenance for areas prone to spills and dirt. How to Use: Preparation: Ensure tiles are fully set before applying Ensure tile joints are clean, dry, and free of debris or adhesive. Use priming wax or tape to protect tile edges, especially for porous or textured surfaces. Always test a small area to confirm compatibility and desired finish. Mixing: Insert the GoPoxy tube into the grout gun and attach the nozzle securely. Discard the first 30–40 cm of grout to ensure proper mixing of the two components. Application: Apply slowly to fill joints completely, avoiding air bubbles. It is mandatory to carry out a test on a small inconspicuous area to test suitability for your job, before applying to the whole job. Use GoPoxy finishing tools for a smooth, professional result. Curing: Working time when dispensed: 30 Mins Final Curing Time: 6-12 Hours depending on temperature. Storage: Store between 8–18°C in a cool, dry place, away from direct sunlight. Ensure the cap is replaced tightly after use. Additional Recommendations: Not suitable for small/ mosaic tiles due to the increased time and cost of application. Not recommended for highly porous stone such as sandstone. Always conduct a compatibility test in an inconspicuous area. Recommended joint width 1-3mm. Do not use on terracotta tiles or surfaces that may be altered by epoxy. Yellowing can occur with white pigments, especially under prolonged UV exposure. Minimize direct sunlight for a fresher appearance. Avoid diluting or altering the product in any way. For unused grout, seal the tube with the cap, and replace the nozzle for later use. Due to the waterproof nature of Gopoxy, there can be a slight sheen under specific lighting. Always test in a small area to ensure the finish matches your preferences. Gopoxy Epoxy Range is not UV resistant and lighter colours may fade over time in sunlight. If using outdoors, select an outdoor specific product from our 'outdoor' or 'poly' range of grouts. · Colours shown are for illustration purposes and may vary slightly from the actual product. Always reference the grout chart for accurate colour representation. The customer is responsible for testing suitability before full application. Aftercare For best results, clean tiled areas grouted with GoPoxy using pH-neutral cleaners only. Avoid the use of acid or alkaline cleaning products, as these can damage the grout surface and compromise its finish. Regular gentle cleaning will help maintain the appearance and performance of your grout for years to come. Do not steam clean. Health & Safety (PPE Requirements) This product must be handled and applied using appropriate personal protective equipment (PPE). As a minimum, we recommend: Respiratory protection: Suitable mask or respirator where ventilation is limited or fumes may be present Eye protection: Safety glasses or goggles to prevent contact with eyes Hand protection: Chemical-resistant gloves (e.g. nitrile) Skin protection: Suitable workwear to prevent skin contact Ensure adequate ventilation during use. Avoid inhalation of vapours and prevent contact with skin and eyes. Do not ingest. Users are responsible for assessing the suitability of PPE based on the specific application and working environment. For full safety information, refer to the product Safety Data Sheet (SDS). Keep Out of Reach: Store safely, away from children and animals. For first aid advice or removal tips, refer to the full instructions or contact our support team. Helpful Tools & Resources: Coverage Calculator for planning your project. Order Grout Chart for precise colour matching. Extra nozzles available for purchase separately. Disclaimer of Liability While GoPoxy is manufactured to the highest quality standards, its performance is dependent on the proper application, adherence to instructions, and environmental conditions. Variations in lighting, substrate transparency, and other factors may result in differences between the in-situ colour appearance and the colour card. Light-coloured products may be prone to pigment yellowing, particularly when exposed to direct sunlight or differing lighting conditions. Our company assumes no responsibility or liability for: Improper use, application, or preparation of surfaces. Unsuitable or incompatible materials used in conjunction with this product. External factors, such as temperature, humidity, or chemical exposure, that may impact performance. Variations in results due to user error or deviations from recommended practices. Colour or finish discrepancies beyond the scope of a small pre-applied and tested area to ensure suitability. It is the responsibility of the customer to test the suitability before applying at scale. It is the responsibility of the user to ensure the product’s suitability for the intended application through preliminary testing on a small, inconspicuous area. By using this product, the customer accepts all risks and liabilities associated with its use. For further guidance or questions, please refer to the instructions provided or contact our support team. Please see our Warranty Policy. Important Colour Information Please Note: Colours shown are for illustration purposes only and may vary slightly from the displayed image. Colour charts, images, packaging, samples, and on-screen representations are provided for reference only. Screen colours may vary between devices and displays. Slight batch variation is normal within resin and pigment-based products. Colour appearance may also vary depending on lighting conditions, substrate type, surrounding materials, and application method. A small inconspicuous test area must always be completed prior to full application to confirm colour suitability and compatibility. For larger installations, we recommend using product from the same batch where possible. In the event of any inconsistency between product packaging, labelling, colour charts, marketing materials, product descriptions, reseller listings, videos, social media content, or other supporting materials, the latest official GoPoxy Warranty Policy and Technical Data Sheet (TDS) shall prevail. Customers and installers should always refer to the current official documentation available at www.gopoxy.co prior to use.
Related
Related
Related
Related