GRABO V2 CURRENTLY ON BACK ORDER UNTIL SEPTEMBER 2026 The GRABO V2 retains the power and compatibility of the original while introducing a PRO-style ergonomic handle, enhanced controls, LED battery indicators, and fully sealed buttons for improved durability in demanding environments. It’s the classic GRABO, upgraded for real-world work. GRABO V2 grips almost any surface The GRABO V2 builds on the trusted performance of the original NEMO GRABO with thoughtful upgrades that make a real difference on the job. It still uses the same internal motor, digital pressure gauge, 14.8V battery, and bottom foam rubber seal you're familiar with—so your existing parts and accessories still work. But now it includes the slimmer ergonomic handle from the GRABO PRO for improved comfort during all-day use, and the enhanced pressure release button for more controlled material release. A new row of five LED lights shows battery level at a glance, and most importantly, all three buttons—power, motor, and pressure release—are now protected with full rubber covers, preventing dust, debris, and water from seeping inside. If you rely on your GRABO in tough conditions, the V2 gives you everything you loved—just stronger, cleaner, and smarter. Perpendicular Hold Parallel Hold Glass 375 lbs (170 kg) 265 lbs (120 kg) Ceramic tiles 375 lbs (170 kg) 265 lbs (120 kg) Metal 242 lbs (110 kg) 242 lbs (110 kg) Plastic 220 lbs (100 kg) 220 lbs (100 kg) Wood 220 lbs (100 kg) 143 lbs (65 kg) Rough slate 176 lbs (80 kg) 176 lbs (80 kg) Rough concrete 176 lbs (80 kg) 176 lbs (80 kg) Drywall 165 lbs (75 kg) 143 lbs (65 kg) Your GRABO V2 can lift up to 165 lbs, depending on: The porosity of your material Your carrying method Use your GRABO® at a perpendicular or parallel angle to handle awkward materials with ease. Lift different shapes and sizes with confidence. GRABO® V2 keeps a secure grip even on textured surfaces. Always match the load to the rated capacity of the tool and monitor material weight closely. The chart below highlights safe lifting guidelines for common building materials. NOTICE: Due to the high pressure that is created with GRABO we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm thick. Damage can occur to glass that is thinner than 6mm thick. Specifications Model/SKU GRABO V2 / GV2-1B-FB-1S Battery 14.8VDC 2600mAh Li-ion Rated Power 16W Charger Input Voltage 100-240VAC 50/60Hz Battery Charging Time ~2hrs Non-Stop Running Time (Full Charge) 1.5hrs Running Cycles (On Full Charge) 900 ON-OFF cycles of 10 seconds Stand-by Mode (Charge Hold) 30 days Pump Service Life 100000+ ON-OFF cycles / 800+ hrs continuous Rated Air Flow 0.7cfm ( 20 L/min ) Maximum Vacuum Rate 11.6Psi ( 0.8 Bar, 80 kPa ) Maximum Lifting Capacity 375Lbs ( 170 kg ) L × W × H 11.77 x 7.22 x 4.79” ( 299 x 184 x 122 mm ) Net Weight (with Battery) 3.3Lbs ( 1.54 kg ) Working Temperature 32°F~140°F ( 0°~60 °C ) Applicable Surface Type Peak/valley heights less than 0.1” ( 3mm )
