Features Real-Time Monitoring on PC and Smart Phone with Wireless LAN Version Email Notifications for Alarm Alerts, Low Battery Warnings & Confirm Setting Changes Attachable and Exchangeable Input Modules for Temperature, Humidity, Acceleration, Carbon Dioxide, Luminance, UV, Voltage, Current, Logic and Pulse Number of Channels: depending on the input module used Display LCD (with backlit monochrome, graphic style 128 x 64 pixels) Display the data collected on the LCD in real time Storing the detected values ??/ data Full control over the GL100 from the PC software Easy control of the GL100 from the application software Smart Device Dust proof and waterproof PC Interface USB, Wireless LAN (IEEE802.11B) Internal Memory 4.9 MB / Micro SD Power supply: Alkaline battery (2xAA) and / or USB bus power (5V, 200 mA) Dimensions: W 66 x H 100 x L 27 mm (exclude protrusion) Weight: GL100-WL: 130g Technical Specs and Details: GL100-WL & GL100-N Series Main Unit Specifications Item Description Number of channels Varies by the input module used, and measurement type is fixed with each input module Input method, Type of input terminal Output signal Alarm (1 channel), solid state switch with optical isolation (Optocoupler, Max. load is the 30 V, 50 mA) Interface to PC USB (micro USB B type connector), Wireless LAN (WLAN) in GL100-WL Wireless LAN (in GL100-WL) Standards: IEEE802.11b, Communication distance: approx. 40 m* It varies by the condition of the LAN. Real-time transfer rate is up to 500ms. The WLAN is able to disable. (It is enabled in the factory default setting) Storage device Built-in memory: RAM (Approx. 4.9 MB)External memory: micro SD memory card Maximum file size for captured data is 1.9MB. It is recommended to use the micro SD memory card that supports sleep mode. (Example: TS4GUSDHC4, made by Transcend) Display LCD (backlit monochrome, graphical type 128 x 64 dots)Contents: Captured data and Setting menu (Stored data is not able to replay. It is able to replay using the PC application software.) Functions Real-time data capturing Display the captured data value to the LCD in real-time and save the monitoring values Set conditions using the Menu setting While using USB port: Output captured data in real-time Output the saved data from the internal memory Full control of the GL100 from the PC application software While using Wireless LAN (in GL100-WL): Output captured data in real-time Output the saved data from the internal memory Full control of the GL100 from the PC application software Simple control of the GL100 from the application software of Smart Device Send warnings via the e-mail Alarm ActionOutputs the signal when the measuring data reaches the present conditions of alarm Source Level of measuring data Detecting method Condition: Higher or lower (signal is higher or lower than the threshold)Combination: OR Trigger ActionStart or stop the recording of captured data by trigger SourceStart trigger: OFF, Level (*), Alarm, or DateStop trigger: OFF, Level (*), Alarm* Level trigger is available in the analog input of the GS-4VT, GS-4TSR, and GS-3AT module. Detecting method of the Level (*)Condition: Rising or Falling (signal is passed through the threshold)Combination: OR or AND Dust proof and waterproof IP54 compatible (*)* It is effective only in the condition that the input module is set to the GL100 and then the covers of connector and battery are closed. It is recommended to replace the packing of cover in periodically. Power source Alkaline battery (AA size x 2) USB bus-power (5V, 200 mA) (*)* When AC adapter for USB device is used, the required power capacity is 5V, 1A. Battery and AC adapter is not included. Operating environment Temperature: -10 °C to 50 °CHumidity: up to 80 % RH (non condensed) External dimension [W x D x H] W 66 x H 100 x L 27 mm (exclude protrusion) Weight GL100-N: Approx. 125 g, GL100-WL: Approx. 130 g.
