Engineered to Achieve High Performance with Affordable Price The Graphtec CE7000 Series is the perfect solution for those looking to increase production with greater efficiency for signage graphics, print & cut graphics, pop & packaging, automotive markets and many more. The rigidity has been enhanced compared to the previous model, which its feeding and cutting quality have also been improved.Our newly developed Advanced Registration Mark Sensing System (ARMS) is installed which will raise the productivity with its variety of functions. ARMS (Advanced Registration Mark Sensing system) Cutting performance that guaranties accurate 5m length cutting. * The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.In addition, by using an optional special basket, stability in long cuts can be achieved. In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec. Data Link Function (Barcode Data Management/Continuous Cutting) By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used. The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported. Data output via USB flash memory without PC When cutting data designed with Cutting Master 5 or Graphtec Studio 2 are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer. The USB flash memory format only supports FAT32.Please note that NTFS and exFAT are not supported. Continuous Cut (Data Link function) Barcode data management allows cutting different data sequentially by detecting the “Start Mark” of the new Barcode. Sequential Print & Cut process with roll-media is now available. Perforation cutting ability Carrier Sheet Table It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet. Available with CE7000-40 / -60. In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table “OPH-A45”. Software You can easily create and cut high quality designs with the standard included software. Graphtec Studio 2Graphic design software Cutting Master 5Plug-in software Specifications Scrollable Item CE7000-40 CE7000-60 CE7000-130 CE7000-160(Not available in US & Korea) Configuration Grit rolling type Drive method Digital servo drive Max. cutting area (W x L) (*1) 375?? × 50? 603?? × 50? 1270?? × 50? 1524?? × 50? Cutting area of guaranteed accuracy (*1) (When using optional basket) 355?? × 2? 583?? × 2m(583?? × 5?) 1250?? × 2m(1250?? × 5?) 1504?? × 2m(1504?? × 5?) Mountable media width Min. 50mm Max. 484?? (19inch) 712mm (28inch) 1372mm (54inch) 1626mm (64inch) Mountable roll media mass 5 kg 9 kg 17 kg 20 kg Number of push rollers 2 rollers 4 rollers (Max. 5 (option)) Max. cutting speed 600mm/sat all direction 900mm/sat 45° direction 1000mm/s at 45° direction Acceleration 21.2?/s2 at 45° direction 13.9m/s2 at 45° direction Cutting force Max. 4.41N (450gf) Minimum character size Approx. 5 mm alphanumeric (varies depending on character font and media) Mechanical resolution 0.005mm Programmable resolution GP-GL?0.1/0.05/0.025/0.01???HP-GL™ (*2)?0.025?? Repeatability (*1) Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) Mountable number of tools 1 tool Blade types Supersteel Pen types Oil-based ballpoint pen, Water-based fiber-tip pen Media types Up to 0.25mm thicknessMarking film (PVC / fluorescence / reflection), polyester film (With specified conditions) Interface USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX Buffer memory 2MB Command sets GP-GL / HP-GL™ (Set by command or auto-detect) (*2) Display Graphic type LCD with back-light (240dots x 128dots), supports 10 languages Power source 100V to 240V AC, 50 / 60 Hz Power consumption Up to 100W Operating environment 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) Guaranteed accuracy environment 16 to 32 ºC, 35 to 70 % R.H. (non-condensing) External dimensions(approx. W x D x H)(with basket) 772?292?313 mm 1005×582×1092 mm(1005×936×1092 mm)(*3) 1704×811×1215 mm(1704×1148×1215 mm)(*3) 1916×811×1215 mm(1916×1148×1215 mm)(*3) Supported software (*4) Graphtec Studio 2, Cutting Master 5, Windows Driver,Graphtec Pro Studio(Windows)(*5), Graphtec Studio(Mac), Cutting Master 4(*5) Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used. HP-GLTM is a registered trademark of Hewlett-Packard Company. When equipped with the stand. Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer. It requires an Internet connection in order for activation or registration when starting the software for the first time. Dimensions CE7000-40 CE7000-60 CE7000-130 / 160 Includes stand. Tolerance : +/- 5 mm Standard accessories Item Q’ty Description Power cord 1 The type of cord is different by destination. USB Cable 1 2.9m long Cutting blade holder 1 PHP33-CB09N-HS Cutting Blade 1 CB09UB-1P Loupe 1 PM-CT-001 Fiber-tip pen holder 1 PHP31-FIBER Water-based Fiber-tip pen 1 KF700-BK (black) Roll Media Tray 1 Standard accessory for CE7000-40/-60(* Not available for CE7000-60 in specificate area.) Stand for CE7000 1 Standard accessory for 130 / 160 Printed document 1 Setup Manual, Safety Manual Option Item Part No. Description Basket for CE7000 series PG0103 For CE7000-60 PG0104 For CE7000-130 PG0105 For CE7000-160 Carrier sheet table OPH-A45 For CE7000-40 or CE7000-60 Additional push roller kit OPH-A49 Only for CE7000-130/CE7000-160 Optional Stand ST0118 For CE7000-60
