Endurance Gravestone & Monument Impregnator

Atlas Preservation Verified independent store

→

Endurance Restoration Gravestone & Monument Impregnator Breathable water repellent with consolidating effect. For natural stone, brick & masonry. Protects against mold and acid rai n. Transparent and UV stable. Siloxane-based. Pro Tip: Clean with Endurance Gravestone & Monument Cleaner to achieve maximum cleaning results before use. GRAVESTONE-MONUMENT IMPREGNATOR is a clear, siloxane-based, breathable water repellent consolidating agent designed for natural stone, brick, masonry, gravestones, and monuments. It protects surfaces from water, grease, and humidity, while also offering a consolidating effect on fragile and corroded stones, preventing crumbling and chalking. GRAVESTONE-MONUMENT IMPREGNATOR safeguards against mold growth, acid rain, and the damaging effects of water penetration and humidity. It helps preserve marble and stone by preventing calcification caused by smog and acid rain. Transparent and UV stable, it maintains the original color of treated surfaces without altering their appearance. Additionally, Gravestone & Monument Impregnator reduces the resurfacing of salts in the stone or substrate, providing long-lasting protection. Instructions For Use (ALWAYS TEST FIRST) Ensure the surface is clean and dry. Remove any stains, mildew, or crusting, as they will beharder to remove after application. Apply GRAVESTONE-MONUMENT IMPREGNATOR using a brush, roller, or sprayer. For best results, use a brush to allow better penetration into the stone. Applying with firm pressure will help the product reach frames and cavities. Continue applying without interruption until the stone is fully saturated and no longer absorbs the product. If using a sprayer, hold it 8–10 inches away from the surface. Allow to dwell on surface for 10 minutes. If surface still remains wet, blot away excess with clean paper towel or cloth. (To safely dispose of paper towel or cloth, submerge in water to prevent spontaneous combustion). During application and drying, the surface temperature should be between 50°F and 86°F. If applying to a floor with underfloor heating, turn off the heating and allow the stone to cool completely before starting. Coverage: 54-270 sq. ft. per quart(Coverage will vary based on the density & texture of the surface) Practical solutions to common problems that withstand the test of timewww.endurancerestoration.com Show more