This 28mm - 32mm scale modular UnderNidus Hab Platform allows you to construct an adaptive set of Hab buildings with enclosing walkways formed from interchangeable bulkheads. The 3" tall bulkheads (13 included) and circular walkways (8 included) connect together and to the core central building sections using OpenLOCK clips. I'd recommend using superglue to keep the walkways parts fully attached to the bulkheads to ensure they don't separate. An assembled Hab Platform floor measures 254mm x 254mm x 75mm (10" x 10" x 3") The railings are optional and slot into corresponding holes on the walkways. Each core central building piece can take a roof insert if required (4 included), so you can make lots of variations with differing height platforms. A set of stairs are included, along with three lengths of ladder*, and a long catwalk piece for connecting platforms. Round out your underhive with the UnderNidus Sump Control Building, the Machinery Clusters, the Gas Processing Unit and the Pump Station. Renders shown are examples only, using all the components in the set. Dimensions: Bulkheads - 74mm x 13mm x 75mmCatwalk Side - 14mm x 170mm x 7mmCentral Core Building - 105mm x 105mm x 78mmCentral Walkway Section - 103mm x 103mm x 8mm Recommended printing resolution - 0.2mm. *All files can be printed on a 200mm x 200mm FDM print bed except the long triple length ladder. Supports not needed.Everything is ready to throw into your slicer of choice and start printing.
