Buy 2, Get 1 Free: The Complete G-FORS Socket Extractor BundleFastener failure is a geometry problem. Once a hex head rounds past its flats, a standard six-point socket has nothing left to engage, and a tapered extractor only bites at its widest point before it cams out and polishes the head smooth. This bundle solves that across the full working range.Pair the XBM10S 10-Pc 3/8" Drive Metric set with the XCM7S 7-Pc 1/2" Drive Metric set, and the XAM9S 9-Pc 1/4" Drive Metric set ships free. Together they deliver continuous metric coverage from 4mm through 25mm across all three common drive sizes, with a single extraction principle behind every socket.What's in the bundle XBM10S — 10-Pc 3/8" Drive Metric. Sizes 10-19mm. The primary-range set covering the bolt and stud sizes most engine, chassis, and drivetrain work lives in. XCM7S — 7-Pc 1/2" Drive Metric. Sizes 19-25mm. Heavier-wall sockets rated for the higher breakaway torque of large, corroded, or seized fasteners. XAM9S — 9-Pc 1/4" Drive Metric (FREE). Sizes 4-12mm. The small-fastener range for tight-access and low-torque work where control matters more than mass. The engineering behind the grip Straight-cut, non-tapered bore. Tapered extractors bite at one narrow band and wedge material outward. The G-FORS™ profile is cut straight, so its grooves contact the fastener sidewall full-length and pull material inward as torque rises — reliable purchase on fasteners rounded up to 100%. Integrated G-FORS™ pusher rod. Thread the rod through the rear of the extractor and the extracted stud, bolt, or screw drives straight out. No bench vise, no hammer and punch. Bi-directional engagement. Grips left and right-hand threads, so you can work a seized fastener back and forth to break the corrosion bond. Material and finish. Premium Cr-Mo steel, corrosion-resistant coating, laser-marked sizing. Hand and impact ready. Warranty: Limited Lifetime Warranty against manufacturing and workmanship defects (excluding drill bits).
