Gate Remover Set is a revolutionary product which reformed the conventional concept of gate-mark removing methods. It's Gunprimer's all-time best seller and widely used by modelers worldwide since its release. Includes Raser Origin Balancer Recover Storage case Step 1: Removing Gate-marksUse the Raser to remove gate-marks.Surface turns glossier than the original surface after the gate-mark is removed. Step 2: Balancing Gloss LevelUse the Balancer White's green side to turn the glossy surface (step 1) to a matte surface. This is the preliminary step before balancing the level of glossiness. Step 3: Recovering Gloss LevelUse the Recover to the matte surface (step 2) to restore the gloss level of the original plastic parts. This completes the Gate-marks removal process with a perfect finish. Raser OriginGate Remover Size: 90x11x3mmMaterial: Tempered GlassTechnology: Super-NanoMade in Korea Super-Nano Technology is applied to Raser v1.5 for improved abrasive performance. With 400 grit force, Raser v1.5 can easily remove gate-marks to produce a clean surface without any scratches. Evolutionary super-nano technology provides a strong 400 grit force incomparable to any other similar products. Balancer White:Advanced Polisher Size : 18*90*15mmMaterial: Advanced Sanding SpongeTechnology: Ultra-FineMade in Korea Balancer is used after the gate-mark is removed with the Raser to balance the gloss level of the surface. Depending on the user's methods, it can be used to process matte, semi-gloss or gloss surfaces. Green side is used for pre-processing the surface before making a glossy surface. After using the green side, a super glossy surface can be acquired using the white side. RecoverSize: 90*90mm x 2Material: Functional fabricTechnology: Twill Weave Recover is a finish touch-up polisher to restore the original gloss level of plastic parts.It polishes the rough surface from sanding and adds a bit of an extra shiny look on the surface.First, use the Balancer's green side then use the Recover to retrieve the plastic's original semi-gloss surface. This step is crucial to have a perfect finish when removing the gate-marks and it's highly recommended for users who don't paint nor use top-coat after building. Important: Residues stuck on the Raser, Balancer, and Recover's surface can decrease performance. To remove residues, clean with water or masking tape. If cleaning with water, dry completely before using. Tempered glass made Raser does not break during normal use. However, it can be damaged from external shocks and drops. Always store in a storage case when not in use. Only use on plastics. Do not use on metals. Do not wet the storage case as it's made of hard paper.
