Overview Automatic measurement to standardize the process Automatic temperature measurement Measurement counter can be useful for control of changing sensor Fine sensor can deliver accurate measurements Features Automatic temperature measurement：AUTO HOLD Function The measurement will end automatically when tip temperature is stabilized. The measurement process will be the same no matter who does it. Constant display of measured max. temperature：MAX HOLD Function Max measured tip temperature will be displayed. This function can be useful for quality control of components and P.W.B. Temperature Sending Function Measurement result by AUTO HOLD function or MAX HOLD function can be sent to a soldering station (FN-1010) through infrared. This function can eliminate manual process of recording results, the time for the process, and human error. Temperature Measurement Count Function Number of tip temperature measurement will be automatically counted. This function can be useful for control of changing sensor. Auto Shutoff Function The power will automatically be shut off after 3 minutes of no use. It can save battery power and time for changing battery. Fine sensor can deliver accurate measurements. Suitable for Lead-Free Solder Disposable sensor always maintains accurate temperature measurment (Replace sensor when the measuring point underwent degradation) Dimensional Measurement Allows you to measure from any desired direction according to tip shape Specifications Model No. FG-100B Power supply 006P 9V dry battery (alkaline cell recommended) Temperature resolution 1 ºC Temperature measurement range 0 to 700 ºC Temperature precision ±3 ºC (300 to 600 ºC) ±5 ºC (other than above) Temperature sensor K (CA)type thermocouple Display LCD : 3 1/2 digits Operating environment Ambient temperature/humidity range : 0 to 40 ºC, max.80% RH (without condensation) Environmental conditions Applicable rated pollution degree 2 (According to IEC/UL 61010-1) Dimensions 68(W)×140(H)×38(D) mm Weight 125g
