Description The Halion is a 200mm circular wall light with a white powder-coated metal base and a blown, acid-etched cased glass diffuser. The single GX53 bulb fitting sits behind the glass, spreading light evenly outward and downward to create ambient wash lighting on walls and adjacent surfaces. The IP20 rating restricts this fitting to dry indoor areas only. Designed as flush-mount ambient lighting for hallways, bedrooms, living rooms and staircases, the Halion sits approximately 60mm proud of the wall when installed. The white finish allows it to recede into light-coloured walls, while the acid-etched glass softens the light source and minimises glare. The GX53 bulb format is a low-profile twin-pin fitting common in flush and semi-flush luminaires, available in LED versions from 7W to 11W with warm-white and neutral-white colour temperatures. The glass diffuser is blown and then acid-etched on the inner surface, which roughens the glass enough to scatter light evenly without creating visible hotspots around the bulb. The white powder-coated metal base provides a clean junction with the wall and conceals the electrical connections. The fitting is dimmable when paired with a compatible GX53 LED bulb and a trailing-edge dimmer switch. The 5-year warranty from Ideal Lux covers manufacturing defects in the metal base and glass diffuser. Specification Diameter (mm) 200 Dimmable Yes Number Of Bulbs 1 Bulb Type GX53 IP Rating IP20 Warranty 5 Years Frequently Asked What bulb does the Halion take? The fitting takes a single GX53 twin-pin bulb. GX53 LED bulbs are available in 7W, 9W and 11W variants with warm-white (2700K-3000K) and neutral-white (4000K) colour temperatures. Bulbs are sold separately. Is this dimmable? The fitting itself is dimmable-compatible. Dimming functionality depends on pairing a dimmable GX53 LED bulb with a trailing-edge dimmer switch rated for LED loads. Not all GX53 bulbs are dimmable, so check the bulb specification before purchasing. Can this be used in a bathroom? No. The IP20 rating means the Halion is suitable for dry indoor areas only and is not protected against moisture ingress. It cannot be used in bathrooms, wet rooms or outdoor locations. How far does it project from the wall? The fitting sits approximately 60mm proud of the wall when installed, making it a flush-mount rather than a fully recessed fitting. The 200mm diameter gives a relatively low profile suitable for hallways and areas with restricted wall space.
