CLICK HERE TO WATCH THIS VIDEO ON YOUTUBE! The Happymodel Mobula6 Freestyle HD BNF is the latest 65mm HD brushless Whoop by Happymodel that weighs less than 19.6g. Every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video! Focusing on freestyle flying, this whoop includes the Runcam HDZero Lux camera and a vibration-free fixed angle 25deg camera mount. The camera features a ½ inch CMOS sensor that delivers sharp image quality and excellent low-light performance. Lux camera has Wide Dynamic Range (WDR) and offers higher quality by oversampling (1080p ‐> 720p). The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability. Optimized for a 4:3 aspect ratio, it can also be configured for a 16:9 aspect ratio with a reduced vertical FOV. The camera boasts a large 94-degree vertical FOV, ideal for fast indoor and outdoor proximity flying. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for. Grab Spare mounts for this camera HERE Specifications Weight: 19.9g Recommended Battery: 1S 300mAh Propellor Size: 31mm AIO MCU: STM32F411 (100MHz, 512K Flash) Gyro: BMI270 On board voltage and amperage meters Built-in 5A(each) BLHeli_S 4-in-1 ESC Built-in 5.8G HDZero VTX Built-in SPI ExpressLRS 2.4GHz receiver Built-in 5V 1A BEC Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size HDZero Lux Camera Sensor size: 1/3 inch Resolution: 720p60 4:3 and 16:9 FOV: D:155° H:126° V:94°(4:3) FOV: D:145° H:126° V:82°(16:9) Motors Kv:28000 Stator diameter: 7mm Stator length:2mm Shaft diameter: Φ1mm Weight:1.5g Included 1x Happymodel Mobula6 Freestyle HD BNF 1x Spare canopy 1x Spare propeller(set) 1x Screw driver 1x propeller disassemble tool
