Basic Resin Designed for daily use in 3D printers for printing models. Resin is odorless, models are rigid, low shrinkage and high accuracy. Designed for daily use in 3D printers for printing models. Resin is odorless, models are rigid, low shrinkage and high accuracy HARZ Lab Basic Resin is a good choice to do first steps in 3D printing. The absence of odor and low toxicity makes the resin ideal for use in the office, schools and universities. It is easy-to-operate with it due to low viscosity - easy to fill vat, to filter, to clean model and printer parts. Resin is very accurate in wide area of curing time, that provide a good quality even at mistaken exposure, which reduces the time for learning 3D printing skills. Liquid The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time. Odorless Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique. Low Shrinkage Shrinkage less than 1% gives you the same size like 3D model on your computer. Safe Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction Hard Resin is hard and tough, showing 82 Shore D hardness, not brittle, you will never damage model separating it from the table Stable Options Resin is very stable, you can leave it for a long time in the vat, no sedimentation and gel formation occur - no need to mix. Compatible Printers Characteristics Appearance: Colored transparent liquid Color: Red Odor: Odorless Viscosity according to Brookfield: 0.6-0.8 Pa*s Tensile strength: 20 N/mm2 Elongation at break: 6-7% Hardness Shore D: 80-85 Shrinkage: 2.5% For Information on creating profiles for Phrozen Shuffle: Click here Basic Resin MSDS
