Convert your HDMI video source to a high definition IP stream compatible with Raymarine, Simrad, B&G and Furuno Chart-Plotters using the HDMI2IP-01 Single Channel Encoder from Iris Innovations. This small and compact little box takes your HDMI video and uses H.265 / H.264 compression algorithms to encode the video into a high definition IP stream which leading chartplotter's process as if it were an IP camera devices. Simply configure the device to sit on your MFD network, hook up your HDMI camera and then configure your MFD in the same way you would configure an IP camera. If your MFD works as an RTSP server (such as Raymarine Axiom and Furuno TZT devices) simply set the HDMI2IP unit to accept its IP address via RTSP and you are good to go. Your MFD will treat the stream as if it were an IP camera, which means once configured, the video will display on all compatible devces connected to your MFD network, greatly simplifying installation. Measuring only 109 x 73 x 25 and weighing only 155g, the HDMI2IP-01 packs a lot of processing power into its compact form factor. The device is powered from your vessel (or vehicle’s) +12VDC supply and draws less than 200mA.
