Description HDZero AIO5 is the world’s first digital video AIO, enabling bind and fly 65mm whoops to weigh less than 19.4g. AIO5 integrates a F4 flight controller, HDZero 5.8GHz digital video transmitter, SPI 2.4GHz ExpressLRS 3.0 receiver, DSHOT protocol 4-in-1 ESC, and a 5V/1A BEC. The minimum voltage has been improved to be 2.3V, which ensures that video never stops transmitting before the motors stop working. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video! The HDZero AIO5 is an excellent collaboration between Happymodel and HDZero. It is available at major FPV resellers worldwide, and also at Happymodel and HDZero official online shops. Specifications MCU: STM32F411 (100MHz, 512K Flash) Gyro: BMI270 On board voltage and amperage meters Built-in 5A(each) BLHeli_S 4-in-1 ESC MCU: EFM8BB21 HV Current: 5A continuous peak 6A (3 seconds) Factory firmware: O_H_5_48_V0.19.2.HEX Dshot600 ready Built-in 5.8G HDZero VTX RF output: 25mw/200mW Supported channels: R1-R8, F2/F4, L1-L8 UFL connector (ultra-lite linear antenna included) Built-in SPI ExpressLRS 2.4GHz receiver Packet rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Pre-soldered enamel wire antenna Telemetry output power:
