The HDZero Whoop V2 Bundle (HDZ3104) is the ultimate digital FPV solution for lightweight builds, pairing the powerful Whoop V2 VTX with the high-performance Nano V3 camera. This bundle is specifically engineered for 1S-3S whoops and micro drones, offering high-definition 720p video with near-zero latency. The Nano V3 camera features a large 1/2-inch sensor for exceptional low-light performance and a wide FOV, making it a significant upgrade for pilots looking for the best image quality in a tiny package. Check out our HDZero Compatible Gear and the rest of our HDZero Products! Features High-Definition Video: Delivers 720p60, 540p90, and 1080p30 resolution options. Low Latency: Optimized for digital FPV racing and freestyle with near-zero visible latency. Improved Durability: Features a thicker PCB for enhanced impact resistance during crashes. Ultra-Sensitive Sensor: Nano V3 camera uses a 1/2 inch CMOS sensor for superior clarity and color. Flexible Mounting: Designed with a standard 25.5x25.5mm mounting pattern for easy integration into most whoop frames. Secure Connectivity: Includes a secured U.FL connector with a brass bar to prevent antenna pop-offs. Specifications Whoop V2 VTX: Model: HDZ3104 Frequency: 5.725 – 5.850 GHz RF Power Output: 25mW / 200mW RF Connector: Secured U.FL with brass bar Video Connector: MIPI Size: 31 × 31 mm (29 × 29 mm inner) Mounting Pattern: 25.5 × 25.5 mm (M2) Weight: 5.4g (5.1g without wires) Power Input: 3V – 12.6V (1S – 3S) Power Consumption: 5W – 6W Control/OSD: MSP OSD / Smart Audio Nano V3 Camera: Sensor: 1/2 inch CMOS Sensitivity: 10650 mV/Lux-sec Resolution: 720p60 4:3 FOV: D:155° H:126° V:94° Weight: 2.2g Dimensions: 14 x 16 x 14 mm Compatibility Flight Controllers: Supports FCs with MSP OSD and Smart Audio protocols. Cameras: Compatible with all HDZero MIPI cameras. Goggles: Requires HDZero compatible digital FPV goggles or VRX. Package Includes 1x HDZero Whoop V2 VTX 1x HDZero Nano V3 Camera 1x Dipole Antenna 1x 40mm MIPI Cable 4x Rubber Grommets (M3 to M2) 3x u.FL Antenna Retention Screws 1x Metal Brass Bar (for antenna retention) Critical Notes Cooling Requirement: This VTX generates significant heat; ensure adequate airflow is provided during operation to prevent thermal shutdown. Do not leave the unit powered on the bench without a fan. Voltage Warning: Supports 1S to 3S input only (3V – 12.6V). Exceeding this voltage will permanently damage the hardware. Antenna Security: Always ensure the antenna is securely attached via the included brass bar before powering the unit to avoid RF damage.
