A standard analogue reverse camera gives you a soft, washed-out picture that makes tight reversing manoeuvres harder than they need to be. The Heavy Duty AHD Reverse Camera from PVS Automotive sends a sharper, cleaner AHD image to any head unit that supports AHD camera input. It's built to handle dust, moisture and vibration, so it keeps working through daily driving and off-road use. What's in the box 1 x Heavy Duty AHD Reverse Camera Why choose it Works with any head unit that supports AHD digital cameras, for a sharper image Heavy duty housing built for durability and weather resistance Delivers clearer visuals than a standard analogue camera Plug and play RCA connection, a simple hookup to most aftermarket head units Runs on 12V systems across a wide range of vehicles 120 degree viewing angle Fit the camera Two connections are all it takes. Run the RCA cable from the camera straight to the reverse camera input on the back of your head unit. Then tap the red wire into the red/black wire on your tail light reverse circuit, and connect the black wire to a clean ground point. If you'd rather trigger the camera manually instead of only in reverse, you can wire it to a switch through an accessory or ignition source. Before you mount it Make sure your head unit supports AHD camera input before you buy. If you're using a switch for activation, connect power through an accessory or ignition source and ground it as required. Test the camera feed on your head unit before you commit to final mounting and cable routing.
