Description HELTEC Mesh Node T096 is an ultra-low-power LoRa mesh node built around the nRF52840 and SX1262, with integrated GNSS, battery management, and a compact antenna design. This listing is for the 863-870MHz version, making it a strong fit for Meshtastic, MeshCore, LoRaWAN development, decentralized communication, solar-powered repeaters, tracking nodes, and low-power off-grid deployments. The T096 combines Bluetooth 5, amplified LoRa transmission up to 28 plus or minus 1 dBm, and a UC6580 L1+L5 GNSS chip supporting GPS, GLONASS, BDS, Galileo, NAVIC, and QZSS. Compared with many ESP32-based nodes, this platform is especially attractive when power efficiency, mesh networking, and battery or solar deployment matter most. Features nRF52840 MCU with Bluetooth support and very low power consumption. SX1262 LoRa transceiver with integrated PA and up to 28 plus or minus 1 dBm transmit power. UC6580 GNSS with support for GPS, GLONASS, BDS, Galileo, NAVIC, and QZSS. 863-870MHz LoRa version for the frequency range used by this listing. Integrated lithium battery management with charge and discharge control, battery detection, and automatic USB / battery switching. USB-C interface with voltage regulation, ESD protection, short-circuit protection, and RF shielding. LDS antenna design for compact GNSS and Bluetooth antenna integration. Meshtastic and MeshCore compatible, with Arduino development resources also available. Solar-ready connector layout for long-running low-power field deployment. Specifications Item Details MCU nRF52840 LoRa Chip SX1262 GNSS Chip UC6580 (L1+L5) Frequency 863-870MHz for this listing Max. TX Power 28 plus or minus 1 dBm Bluetooth Bluetooth 5, Bluetooth Mesh Hardware Resources USB 2.0, 2 x LEDs, 2 x Buttons, 4 x SPI, 2 x TWI, 2 x UART, 4 x PWM, QSPI, I2S, PDM, QDEC External Connectors Type-C USB, 1.25-2P battery connector, 1.25-2P solar panel connector, LoRa ANT (IPEX1.0), GNSS ANT (IPEX1.0), 2 x 13 x 2.54 header pins Power Supply USB-C 5V, Lithium battery 3.7V (3.3V to 4.2V) Operating Temperature -20 to 70 C Board Dimensions 52.00 x 25.40 x 10.26 mm Package Dimensions 7.5 x 7.5 x 2.6 cm Weight 55 g Applications Meshtastic nodes for off-grid messaging, telemetry, and long-range mesh communication. MeshCore nodes for secure decentralized LoRa mesh networking. Solar-powered repeaters and relay nodes where low current draw matters. Portable field mesh devices with Bluetooth and GNSS support. Asset tracking and location-aware sensing using integrated GNSS. LoRaWAN and Arduino development using Heltec's nRF development framework and examples. Product List Mesh Node T096 x1 LoRa antenna x1 SH1.25 x2 battery connector x1 Pin header x2 Other Content Ultra-low power consumption is one of the biggest reasons to choose the T096. Heltec specifically positions it as a lower-power alternative to many ESP32-based nodes, which makes it especially attractive for Meshtastic solar nodes, battery repeaters, and long-duration off-grid mesh deployments. Meshtastic and MeshCore are both natural fits for this board. The combination of nRF52840, SX1262 with PA, and integrated GNSS gives the T096 a strong position for Meshtastic messaging nodes and MeshCore secure mesh communication builds. LDS antenna integration helps keep the board compact while still providing GNSS and Bluetooth support, and the board also exposes IPEX connectors for LoRa and GNSS antennas when external antenna routing is needed. GNSS placement matters. For reliable location fixes, the node should be used outdoors or with appropriate antenna visibility, and Heltec provides a documented path for switching from the default LDS antenna to the external GNSS IPEX antenna when needed. Resources Heltec Mesh Node T096 Product Page Heltec T096 Documentation T096 Datasheet PDF T096 Schematic Diagram T096 User Manual Heltec nRF Framework and Library Guide Meshtastic Official Site Meshtastic Web Flasher MeshCore Official Site MeshCore Device Flashing Guide FAQ Is this listing the 863-870MHz version?Yes. This product page is specifically for the 863-870MHz version of the HELTEC Mesh Node T096. Does T096 support Meshtastic and MeshCore?Yes. Heltec lists the board as compatible with both Meshtastic and MeshCore. Why choose T096 over many ESP32-based mesh nodes?The biggest advantage is its lower power consumption thanks to the nRF52840 platform, which makes it a better fit for battery-powered or solar-powered deployments. What should I do if GNSS does not lock properly?Use the node in an open outdoor environment, keep the antenna side oriented for better sky visibility, and use the external GNSS antenna path if required for your deployment.
Related
Related
Related
Related