Lightweight, ready-to-install panels with HempWood® veneer on one face and a stable PureBond® plywood backer. HempWood® Single Sided Panels are engineered using our patented hemp hardwood technology. Each panel pairs a HempWood® veneer face with FSC-certified PureBond® plywood on the back, creating a lighter-weight panel that is durable, commercial grade, and ultra-low VOC. These panels are made in the USA from hemp grown within about 100 miles of the factory in Murray, Kentucky. They use a soy-based adhesive with no added formaldehyde. Ideal applications Cabinetry and built-ins Shelving and casework Tabletops and counters Accent walls, paneling, and ceiling details Standard sizes HempWood® veneer on a PureBond® plywood backer. Two standard thicknesses are available, 5/8" and 4/4". 4 × 8 ft 5/8" × 48" × 96" (≈ 16 mm × 1219 mm × 2438 mm) 4/4" × 48" × 96" (1" nominal, ≈ 25 mm × 1219 mm × 2438 mm) 4 × 4 ft 5/8" × 48" × 48" (≈ 16 mm × 1219 mm × 1219 mm) 4/4" × 48" × 48" (≈ 25 mm × 1219 mm × 1219 mm) 10 in × 4 ft 5/8" × 10" × 48" (≈ 16 mm × 254 mm × 1219 mm) 4/4" × 10" × 48" (≈ 25 mm × 254 mm × 1219 mm) Price per square foot 5/8″ = $8 / sq.ft. 7/8″ = $9 / sq.ft. You know your project and what you need, so we’re here to provide the perfect fit every time. Custom sizing is available at no extra cost. Estimates are provided by the square foot. Standard sizes listed above are ready to order. Contact us at [email protected] or (888) 338-1235. Key performance details Made in USA Commercial grade with Class 1 fire rating Carbon-negative** from cradle to gate No VOCs / no added formaldehyde** (tested below limit of quantitation) Density: approx. 60 lb/ft³ (≈ 960 kg/m³) Janka hardness: 2,000+ lbf (around 20% harder than solid oak) Working and finishing For best results, we recommend reviewing the HempWood® Machining Guide and Finishing Guide before cutting, sanding, or finishing your panels. Machining: use standard woodworking machinery. Sharp carbide-tipped blades and bits are recommended. Sanding: progressively sand and finish around 120 grit or finer before applying stain or topcoat. Finishing: oil-based stains and high-quality clear finishes perform best. Water-based stains tend to raise the grain and may require additional sanding.
