HeyGears Reflex 2 Series Heating Scraper — Heated Accessory for Stable Resin Printing The HeyGears Reflex 2 Series Heating Scraper is a dedicated heated accessory for HeyGears Reflex 2 series resin printers. It adds smart scraper-assisted heating to help bring resin into a more stable working temperature range, reducing cold-resin viscosity issues that can affect release behavior, drainage, and print consistency. The official HeyGears Store product page lists 68% faster resin heating, ±1 °C temperature control, maintained resin temperature during printing, and faster drainage for high-viscosity resins. HeyGears reports heating UltraPrint-Production PAP10 resin from 10 °C to 22 °C in 6 minutes, and also reports more than 24% shorter drainage waiting time in PAU20 tooling-resin testing. For a complete Reflex 2 workflow, pair this accessory with the HeyGears UltraCraft Reflex 2 or HeyGears UltraCraft Reflex 2 Pro. Keep maintenance consumables such as the Reflex 2 Series Release Film and Reflex 2 Series Pulsing Release Film ready, and compare with HeyGears UltraPrint PAU20 Tooling Resin for high-viscosity tooling-resin workflows. Technical Specifications Parameter Value Brand HeyGears Product Name Reflex 2 Series Heating Scraper Product Type Heated scraper accessory for resin printing workflow control Compatible Printers HeyGears Reflex 2 3D Printer and HeyGears Reflex 2 Pro 3D Printer Official Variant For Reflex 2 & 2 Pro OpenELAB SKU Heygears-reflex-2-series-heating-scraper Official SKU 23010300098 Primary Function Smart scraper-assisted heating for more stable resin temperature and print workflow consistency Heating Performance 68% faster resin heating reported by HeyGears; 10 °C to 22 °C in 6 minutes in UltraPrint-Production PAP10 resin testing Temperature Control ±1 °C precise temperature control according to HeyGears In-Print Temperature Support Maintains optimal resin temperature throughout printing according to HeyGears Drainage Improvement More than 24% shorter drainage waiting time reported in PAU20 tooling-resin testing at 50 μm, heating from 25 °C to 35 °C for models above 40 mm cross-sectional area Best Workflow Match Reflex 2 series users printing in cooler rooms or with higher-viscosity HeyGears resins Dimensions / Power Input Not publicly specified on the official product page Product Page Status Official HeyGears page lists the accessory as available Usage Notes & Workflow Guide Check Compatibility First — Use this accessory only with Reflex 2 and Reflex 2 Pro printers, because the official listing does not state compatibility with earlier Reflex or Reflex RS systems. Use for Temperature Stability — Enable heating when resin temperature is below the desired working range or when high-viscosity resin needs improved flow and drainage. Keep Profiles Consistent — Heated resin can flow and drain differently, so validate resin profiles after changing temperature, material, or room conditions. Maintain the Release System — Heating helps resin behavior, but it does not replace normal release-film inspection, vat cleaning, and consumable replacement. Handle Resin Safely — Wear nitrile gloves and eye protection when working around uncured resin, and keep resin away from children, pets, skin, and eyes. Avoid Hot-Surface Contact — Let heated parts cool before direct handling, cleaning, storage, or maintenance. Clean Before Storage — Remove resin residue according to the Reflex 2 maintenance workflow and store the accessory dry and protected from dust. Use Official Guidance — Follow HeyGears printer prompts, safety guidance, and accessory installation instructions for the final operating procedure. Packing List 1 × HeyGears Reflex 2 Series Heating Scraper FAQ Q: Which printers is this heating scraper compatible with?A: The official listing states compatibility with HeyGears Reflex 2 and Reflex 2 Pro 3D printers. Q: Is it compatible with Reflex, Reflex Turbo, or Reflex RS?A: The official page does not list those models, so it should be treated as a Reflex 2 / Reflex 2 Pro accessory unless HeyGears confirms otherwise. Q: What does the heating scraper improve?A: It helps maintain resin temperature, improves resin heating speed, and can reduce drainage waiting time for high-viscosity resins under the tested conditions reported by HeyGears. Q: What heating result does HeyGears report?A: HeyGears reports heating UltraPrint-Production PAP10 resin from 10 °C to 22 °C in 6 minutes, with ±1 °C temperature control. Q: Does it replace release film maintenance?A: No. Release film and pulsing-release components still need routine inspection and replacement when worn or damaged. Q: Should slicer settings be recalibrated after using heating?A: If temperature, resin type, or room conditions change, run a quick validation print before important jobs because resin flow and drainage can change. Q: What comes in the package?A: The package contains one HeyGears Reflex 2 Series Heating Scraper for Reflex 2 and Reflex 2 Pro workflows.
