Overview The URB2424YMD-5WR3 is a compact DC-DC power module that converts 24V (9–36V input range) to a single 24V output at 208 mA. Engineered for rugged industrial environments, this module provides isolated power with robust protection, a small footprint, and a consistent pinout across variants for rapid design-in and interchangeability within the UR(B)_YMD family. Key Features Input: 24V (9–36V wide range) Output: 24V at 208 mA (single output) Isolation: galvanic isolation between input and output Package: URB2424YMD-5WR3 with dimensions 25.4 × 25.4 × 11 mm Protection: overcurrent and short-circuit protection; thermal considerations per datasheet Low ripple and stable operation with recommended EMC filtering networks Electrical Specifications (Typical) Parameter Value Notes Input voltage 9–36 V (24 V nominal) Wide-range input for vehicle and industrial environments Output voltage 24 V Single output Output current 208 mA Continuous Isolation Yes Galvanic isolation between input and output Operating temp -40°C to 85°C Ambient range varies by application Mechanical and Pinout (Representative) Fixed pinout with a consistent footprint across UR(B)_YMD family. Refer to the datasheet for exact pin definitions and layout. Visuals below show bottom and side views for the single-output variant. Notes on EMC and Filtering Follow vendor recommendations for external EMC filtering to meet ripple and noise targets. Typical guidance includes capacitors and inductors in the input and output stages tailored to the single 24V output configuration. Usage Guidance Integrate with proper input filtering, observe minimum load requirements for stable operation, and verify that total external capacitance does not exceed recommended limits. Ensure mechanical mounting adheres to the provided footprint for reliability. Documentation and Resources Consult the URB_YMD family datasheets and application notes for full electrical and mechanical details, including pin definitions, thermal considerations, and recommended test circuits.