HiFi Rose RA180 Reference Integrated Amplifier

Vinyl Sound USA Verified independent store

→

HiFi Rose RA180 Reference Integrated Amplifier at Vinyl Sound Buffalo, NY USA The RA180 is a reference integrated amplifier from HiFi Rose (Seoul, South Korea), available at Vinyl Sound in Buffalo, New York, USA. Built around HiFi Rose's proprietary Class AD topology, the RA180 uses next-generation Gallium Nitride (GaN) FETs in place of conventional silicon switching devices, reducing dead time to one-tenth or less for a near-perfect linear output. The result is an amplifier rated at 200 watts per channel into 8 ohms across four independent mono amplifier channels, with a THD of just 0.005% at 50W and a damping factor exceeding 150. Featuring a variable-EQ MM/MC phono stage, an active crossover for supertweeter integration, a built-in balanced power supply using SiC FET technology, and a visually striking solid aluminum chassis, the RA180 earned Stereophile Recommended Component status in 2025 and The Absolute Sound Editors' Choice Award in January 2023. GaN FET Class AD Amplification: Beyond the Limits of Class D Conventional Class D amplifiers switch at high speed to achieve efficiency, but silicon FETs introduce non-linearity during the dead time between switching transitions, which many listeners perceive as a hardness or grain in the sound. The RA180 replaces silicon FETs with Gallium Nitride (GaN) FETs, a semiconductor material capable of switching at speeds approaching zero dead time. HiFi Rose designates this topology "Class AD," reflecting its position beyond Class D: the linearity achieved rivals that of Class A and Class AB designs, while retaining the efficiency advantage of Class D. Each of the four independent mono amplifier modules delivers 200W into 8 ohms, and pairs of modules can be combined in BTL (bridged transformer-less) mode to yield 400W per channel. A dedicated high-frequency module handles supertweeter frequency ranges up to 100 kHz, while the primary module covers stable mid-bass duties, enabling internal bi-amplification through the built-in active crossover. Wide-Bandwidth Design and Balanced Power Supply The RA180 maintains a frequency response extending to 90 kHz within +/-3 dB, and the design accommodates high-resolution sources with output up to 50 kHz, 100 kHz at -3 dB, and 200 kHz at -6 dB. This ultra-wide bandwidth is engineered to faithfully reproduce harmonic information that extends well beyond conventional human hearing, contributing to a deep and expansive soundfield. The dedicated power supply employs fourth-generation Silicon Carbide (SiC) FET technology for high output with reduced heat, and incorporates a self-developed Power Factor Correction (PFC) circuit to maintain stability under sudden load changes. The result is a damping factor of over 150 and peak power delivery of 1,000W from an 800W SMPS, providing the dynamic headroom required for difficult speaker loads. The variable-EQ phono stage supports both Moving Magnet and Moving Coil cartridges, with adjustable turnover and roll-off settings matching curves from Columbia, Decca, Capitol, and RIAA standards, using components at 0.1% tolerance. Key Features Class AD GaN FET Amplification: Four independent 200W mono amplifier modules using Gallium Nitride FETs for switching dead time reduced to one-tenth of silicon, delivering linear, natural sound. BTL Bridged Mode: Pairs of modules combine to output 400W per channel into 8 ohms for driving demanding loudspeakers. Internal Bi-Amplification: A dedicated high-frequency module with active crossover (600 Hz to 6 kHz, variable) allows simultaneous drive of woofers and supertweeters from a single chassis. Variable-EQ MM/MC Phono Stage: Handles both Moving Magnet and Moving Coil cartridges with adjustable turnover and roll-off to match historical vinyl EQ curves. Ultra-Wide Frequency Response: Extends to 200 kHz at -6 dB, accommodating high-resolution digital sources and supertweeter-equipped speaker systems. SiC FET Balanced Power Supply: Fourth-generation SiC FET technology with PFC circuit provides high damping (exceeding 150) and immunity to load fluctuations. Pure Direct Mode: Bypasses tone controls, balance, and active crossover to route the input signal with maximum purity. Five Analog Inputs: Three unbalanced RCA line inputs, one balanced XLR input, and one phono input (MM/MC switchable). Motorized Volume Control: Front-panel volume knob is motorized and remote-operable, with gear-driven mechanism visible through a clear hexagonal window. Solid Aluminum Chassis: High-purity aluminum construction minimizes resonance; FURUTECH pure-copper AC inlet for improved conductivity. Technical Specifications Amplifier Output (4 ohms) 200W x 4ch (800W total) Amplifier Output (8 ohms) 200W x 4ch (800W total) BTL Mode Output 400W x 2ch THD 0.005% at 50W (balanced/unbalanced inputs) Damping Factor Greater than 150 (at 200W x 2ch) Signal-to-Noise Ratio 107 dB (BTL) / 105 dB (balanced/unbalanced) / 80 dB (MM phono) / 60 dB (MC phono) Input Sensitivity (Balanced XLR) 2,000 mV Input Sensitivity (Unbalanced RCA) 1,000 mV Input Sensitivity (Phono MM/MC) 5 mV / 0.5 mV Input Impedance (Balanced XLR) 44k ohms Input Impedance (Unbalanced RCA) 47k ohms Output Impedance (Speaker) 53 milliohms Bandwidth (-3 dB / 8 ohms) 10 Hz to 90 kHz Frequency Response (1W, +/- 1 dB / 8 ohms) 10 Hz to 90 kHz Subsonic Filter -3 dB at 50 Hz (switchable) Tone Control Bass (100 Hz) / Treble (10 kHz) +/- 15 dB (switchable) Active Crossover (HPF) 600 Hz to 6 kHz, switchable Phono EQ Turnover Flat / 300 Hz / 400 Hz / 500 Hz / 700 Hz (5 steps including RIAA) Phono EQ Roll-Off Flat / 1.6 kHz / 2.1 kHz / 3.18 kHz / 3.4 kHz / 6.36 kHz (6 steps including RIAA) Power Supply SMPS 800W (maximum output 1,100W) AC Input Voltage AC 100-230V, 50/60 Hz Standby Power Consumption Less than 0.5W Trigger Input 3.3V to 12V DC IR Remote Control 38 kHz infrared (within 10m) Dimensions 430 x 350 x 110 mm (W x D x H) Weight 16.7 kg (36.8 lbs) Chassis Material High-purity aluminum Country of Origin South Korea Connections at a Glance Inputs: 3x unbalanced stereo RCA line, 1x balanced XLR, 1x phono RCA (MM/MC) Speaker Outputs: Two pairs of binding posts (speaker A/B selector) Subwoofer Output: 1x RCA Trigger: IR input (38 kHz) AC Power: FURUTECH pure-copper IEC inlet Awards and Critical Recognition Stereophile Recommended Component, 2025 The Absolute Sound Editors' Choice Award, January 2023 Frequently Asked Questions What is the HiFi Rose RA180? The HiFi Rose RA180 is a reference integrated amplifier from Seoul, South Korea, using a proprietary Class AD GaN FET switching topology to deliver 200W per channel across four independent mono amplifier modules, with a full-featured preamplifier section including MM/MC phono, active crossover, tone controls, and BTL bridging capability. It is Stereophile's Recommended Component for 2025 and received The Absolute Sound Editors' Choice Award in January 2023. How does the RA180 compare to the NAD M33? The HiFi Rose RA180 and the NAD M33 are both Class D-derived integrated amplifiers, but they differ in key areas. The NAD M33 uses Purifi Eigentakt amplifier modules rated at 200W per channel in a stereo configuration and includes a built-in streaming DAC with BluOS. The RA180 uses four independent GaN FET mono modules enabling internal bi-amplification and BTL bridging to 400W per channel, and includes a variable-EQ phono stage. The RA180 does not include a built-in streaming module, making it the preferred pairing for an external HiFi Rose streamer such as the RS451 or RS151. What is Class AD amplification? Class AD is HiFi Rose's designation for their GaN FET-based switching amplifier topology. In conventional Class D designs, silicon FETs require a "dead time" pause between switching transitions to prevent short-circuit conditions; this dead time introduces non-linearity that some listeners perceive as grain or hardness. By substituting Gallium Nitride FETs, which can switch far faster, the RA180 reduces dead time to one-tenth of that in silicon-based designs, achieving a near-perfectly linear output and a smoother, more natural sound character consistent with Class A and Class AB amplifiers. Can the RA180 drive difficult loudspeakers? Yes. The RA180 is specifically engineered for demanding speaker loads. Its damping factor exceeds 150 and output impedance measures just 53 milliohms, providing tight control of woofer cone motion. With 800W of total amplifier power across four channels, BTL mode delivering 400W per channel, and a power supply capable of 1,000W peak output, the RA180 has substantial reserves for low-sensitivity or low-impedance loudspeakers. The built-in active crossover also allows internal bi-amplification, eliminating passive crossover losses when driving speakers with separate HF and LF terminals. Does the RA180 work with a turntable? Yes. The RA180 includes a full-featured MM/MC phono stage with variable equalization. A simple switch selects between Moving Magnet and Moving Coil cartridge types, and separate adjustments for bass turnover and high-frequency roll-off allow the phono stage to accurately reproduce records mastered to non-RIAA curves used by Columbia, Decca, EMI Capitol, and other historical labels. Components are specified at 0.1% tolerance for precision tracking of chosen EQ settings. What is the difference between the RA180 and the HiFi Rose RA280? The RA280 is HiFi Rose's smaller and more affordable integrated amplifier sharing the same GaN FET Class AD topology, rated at 250W per channel in a stereo dual-mono configuration. The RA180 operates as a four-channel mono design enabling internal bi-amplification and BTL bridging, adds an MM/MC phono stage with variable EQ, includes an active crossover for supertweeter integration, and extends frequency response to 200 kHz at -6 dB. The RA280 includes front-panel VU meters and a simpler feature set suited to conventional two-channel loudspeaker systems. Where can I buy the HiFi Rose RA180 in Buffalo or the USA? The HiFi Rose RA180 Reference Integrated Amplifier is available at Vinyl Sound in Buffalo, New York, an authorized HiFi Rose dealer serving customers across the USA. Visit Vinyl Sound to audition the RA180 and explore the full HiFi Rose lineup including streamers, DACs, and all-in-one systems. Show more