Compact Design Its compact designed display and Valve Unit enable a versatile installation into the vehicle and the engine compartment. Wide Boost Range The boost level can be controlled baseline boost to 300kPa (43.0PSI). Simple Boost Setting Just directly input the desired boost value to modes A, B and C, and let EVC7 control the boost.ã Return Function Once EVC7 is turned off, the boost level returns to the baseline value. For some vehicles, the boost may become lower than the the stock setting EVC7 is off. Scramble Function With the scramble function, the boost can be increased by a designated value above the set boost value. The increase in boost is obtained while pressing buttonâ of the display or the optional external scramble switch (using the provided harness).The time span of the boost increase after the release of the button can also be set. QuadrupleBoost Mode Setting A, B, C and D Mode are the 4 user specified preset boost level selections. Each mode can be used for a different purpose or situation. Warning Function If the boost exceeds the user selectable warning value, EVC7 notifies the user an audiable beep and visible warning display. Simultaneously, it lowers the boost to the baseline boost value or a user preset point. This function prevents damage to the engine and/ or the turbine from excessive boost. Throttle Position Input With the throttle position sensor signal input, boost characteristics can be turned is relation to throttle percentage. This is an optional function. RPM Signal Input With the vehicle speed signal input, boost characteristics can be turned in relation to vehicle speed. This feature works on applications that utilize speed pulses between 2 to 16 and have the maximum speed capacity of 500km/h. Speed Signal Input With the vehicle speed signal input, boost characteristics can be tuned in relation to vehicle speed. This feature works on applications that utilize speed pulses between 2 to 16 and have the maximum speed capacity of 500km/h. Map Adjustment Function Input of the throttle signal and the engine RPM or vehicle speed signals can draw a 3D map by using 2 these signals as axes. Using the 3D map enables easy control of the boost characteristics. (The setting signals as axes. Using the 3D map enables easy control of the boost characteristics. (The setting range must be within -300 Point â 300 Point to the ValveControl Value setting.) This function is user selectable to be on or off. Digital Triple Data Meter 3 digital data readings of the surge tank pressure, throttle percentage, and engine RPM or vehicle speed can be displayed. Data Memory Function All set values are saved in the internal memory of EVC7. Therefore, setting are protected when the ignition is off or if the battery is disconnected. Exhaust Bypass (wastegate type) Selection EVC7 can works with both internal and external wastegate types. Pressure Unit of Measure Selection The unit of measure for pressure can be selected from kPa or PSI. Dimmer Function The brightness of the display unit is adjustable. Data Lock Function To prevent accidental change of data setting, the unit can be locked with a code Large Full-Color Multi-Display Utilizing a large full-color display enables clear day and night viewing. The multi-display also enables simultaneous data recognition.
Related
Related
Related
Related