Hobart Handler 125 MIG Welder (500573) Operating off 120 volt household current, the Hobart Handler 125 MIG welder comes with a built-in gas valve and welds up to 3/16" material. Thanks to the built in gas valve, all you need to do is add a regulator and you're ready to MIG weld with .030-.035 in. solid wire. Use C-25 gas (75% Argon/25% CO2) on 24 gauge - 18 in steel for a cleaner weld with less spatter. Require 18-12 gauge stainless steel? Add tri-mix gas and stainless wire and you're in! Product Video Features Welds 24 gauge up to 3/16 inch steel (with flux cored wire) Proven built-in wire feeder with quick-release drive roll tension lever Built-in contractor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding. Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness. Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.6 - 0.9 mm) wire Self-resetting thermal overload and motor protection Comes Complete With:• Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030-.035 in wire• .030 in. (0.9 mm) contact tips• 10 ft. (3 m) work cable with clamp• Spool shaft to accommodate 4 or 8 inch spools• Power cord with plug• Weld set-up and parts information chart• 5/3/1 Industrial Warranty. Five year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); one year on guns (MIG and plasma torches) Specifications Amperage Range: 25-130 A Duty Cycle: 25% @ 80A | 100% @ 40A Mild Steel Thickness: 24 ga - 3/16" Weight: 57.5 lbs Dimensions: 13.5" H x 10" W x 19.4" L Download Product Spec Sheet
