The M10 GPS is equipped with a multi-constellation Global Navigation Satellite System (GNSS) powered by the u-blox M10 series, which functions as a concurrent GNSS receiver capable of receiving and tracking multiple GNSS systems simultaneously. Due to its advanced multi-band radio frequency front-end architecture, the system can concurrently receive signals from all four major GNSS constellations: GPS, Galileo, GLONASS, and BeiDou. The module is equipped with the IST8310 compass, a tricolored LED indicator, an acoustic buzzer, and a safety switch. It offers three distinct connector options designed for various applications. This module is configured with a baud rate of 115200 5Hz. The high-gain 25 x 25 mm patch antenna delivers exceptional performance, while its omnidirectional radiation pattern enhances installation flexibility for various devices. This antenna is equipped with active circuitry designed for the ceramic patch configuration and includes a rechargeable backup battery to facilitate warm starts. Note PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required. The Status LED driver has changed. This LED is supported in PX4 1.14, ArduPilot 4.4.0 & later. (More info) Features The newest Ublox 10th Gen GNSS Fast & Accurate Positioning High-gain 25*25*4mm antenna IST8310 Compass Internal Buzzer, Safety switch Ultra Bright UI RGB LED Specification Holybro M10 GPS Holybro M9N GPS GNSS Receiver Ublox M10 Ublox M9N Number of Concurrent GNSS Up to 4 GNSS Up to 4 GNSS BeiDou BeiDou Galileo Galileo GLONASS GLONASS GPS GPS QZSS QZSS Frequency Band GPS L1 GPS L1 Galileo E1 Galileo E1 GLONASS L1 GLONASS L1 BeiDou B1 BeiDou B1 SBAS L1 SBAS L1 QZSS L1 QZSS L1 Compass IST8310 IST8310 Output Protocol UBX (U-Blox) UBX (U-Blox) NMEA NMEA Accuracy 2.0m CEP 1.5m CEP Nav. Update Rate Up to 25 Hz (single GNSS), Up to 25 Hz (4 concerrent GNSS) Up to 10 Hz (4 concurrent GNSS) GNSS Augmentation System EGNOS, GAGAN, MSAS and WAAS EGNOS, GAGAN, MSAS and WAAS QZSS: L1S QZSS: L1S Default Baud Rate 115200 115200 Input Voltage 4.7-5.2V 4.7-5.2V Port Type JST-GH-10P JST-GH-10P Antenna 25 x 25 x 4 mm ceramic patch antenna 25 x 25 x 4 mm ceramic patch antenna Power consumption Less than 200mA @ 5V Less than 200mA @ 5V Operating Temperature -40~80℃ -40~80℃ Dimension φ50 x14.4 mm φ50 x14.4 mm Weight 32g 32g Cable Length 26cm (42cm cable purchase separately) 26cm (42cm cable purchase separately) Other Tri-color LED Tri-color LED Onboard Buzzer Onboard Buzzer Safety Switch Safety Switch LNA MAX2659ELT+ RF Amplifier LNA MAX2659ELT+ RF Amplifier Rechargeable Farah capacitance Rechargeable Farah capacitance Low noise 3.3V regulator Low noise 3.3V regulator PIN MAP Note: For Ardupilot User, if you are unable to perform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation. Difference between the three cable options SKU12040 - Holybro M10 GPS (JST GHR1.25mm 10pin cable): This connector is the most widely utilized option and is compatible with the 10-pin "GPS Module" or "GPS1" input port on the Pixhawk Standard Flight Controller. SKU12042 - Holybro M10 Secondary GPS(JST GHR1.25mm 6pin cable): This connector is compatible with the 6-pin "UART & I2C" or "GPS2" input ports on the Pixhawk Standard Flight Controller, serving as an additional GPS option. Furthermore, this GPS device is also compatible with the GPS2 port of the Cube Flight Controller. SKU12041 - Holybro M10 GPS for Pix32 & Pixhawk1/2.4.6/2.4.8 (Molex1.25mm 6pin & 4pin &3pin cable): These connectors are for "Switch", "GPS", and "I2C" input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6/2.4.8 Reference Link: Holybro Documentation Ardupilot IST8310 Compass Orientation Dimension 3D CAD File Downloads Package Includes: 1x M10 GPS Module 1x Fixed Carbon Fiber GPS mount Spare Parts & Accessories GPS Extended Length Cable
