Overview: The M9N GPS uses multi-constellation GNSS powered by u-blox M9N, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently. It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 (38400 previously). The high-gain 25 x 25 mm2 patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts. Features: • Ublox M9N GNSS Reciever • Accurate Positioning • Fast Navigation Update Rate • IST8310 Compass • High-gain 25*25*4mm antenna • Internal Buzzer, Safety switch • Ultra Bright UI RGB LED Specifications: Holybro Micro M10 GPS Holybro Micro M9N GPS GNSS Receiver Ublox M10 Ublox M9N Number of Concurrent GNSS Up to 4 GNSS- BeiDou- Galileo- GLONASS- GPS- QZSS Up to 4 GNSS- BeiDou- Galileo- GLONASS- GPS- QZSS Frequency Band - GPS L1- Galileo E1 - GLONASS L1- BeiDou B1- SBAS L1- QZSS L1 - GPS L1- Galileo E1 - GLONASS L1- BeiDou B1- SBAS L1- QZSS L1 Compass IST8310 IST8310 Output Protocol - UBX (U-blox)- NMEA - UBX (U-blox)- NMEA Accuracy 2.0m CEP 1.5m CEP Nav. Update Rate Up to 25 Hz (single GNSS),Up to 10 Hz (4 concurrent GNSS) Up to 25 Hz (4 concerrent GNSS) GNSS Augmentation System EGNOS, GAGAN, MSAS and WAASQZSS: L1S EGNOS, GAGAN, MSAS and WAASQZSS: L1S Default Baud Rate 115200 115200 Input Voltage 4.7-5.2V 4.7-5.2V Port Type JST-GH-6P JST-GH-6P Antenna 25 x 25 x 4 mm ceramic patch antenna 25 x 25 x 4 mm ceramic patch antenna Power consumption Less than 200mA @ 5V Less than 200mA @ 5V Operating Temperature -40~80℃ -40~80℃ Dimension - 32 x 26 x 9mm (w/o Case)- 34 x 28 x 11mm (With Case) - 32 x 26 x 9mm (w/o Case)- 34 x 28 x 11mm (With Case) Weight - 14g (w/o Case)- 16g (With Case) - 14g (w/o Case)- 16g (With Case) Other - LNA MAX2659ELT+ RF Amplifier- Rechargeable Farah capacitance- Low noise 3.3V regulator - LNA MAX2659ELT+ RF Amplifier- Rechargeable Farah capacitance- Low noise 3.3V regulator Note The Status LED driver has changed. This LED is support in PX4 1.14, ArduPilot 4.4.0 & later. (More info) Ardupilot User: If unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation. Pin Map Cable Options: SKU12027 - Holybro M9 GPS (JST GHR1.25mm& 10pin cable): This option is the most common, it is used on the This connector can be used on Pixhawk Standard Flight Controller 10pin “GPS Module”or "GPS1" input port. SKU12029 - Holybro M9 Secondary GPS (JST GHR1.25mm 6pin cable): This connector can be used on Pixhawk Standard Flight Controller 6pin“UART I2C”or "GPS2" input port as secondary GPS. This GPS is also compatible with the Cube Flight Controller GPS2 Port. SKU12028 - Holybro M9 GPS for Pix32 & Pixhawk1/2.4.6/2.4.8 (Molex1.25mm 6pin & 4pin & 3pin cable): These connectors are for "Switch", "GPS", and "I2C" input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6 / 2.4.8 Package Includes: • 1x M9N GPS Module • 1x Fixed Carbon Fiber GPS mount
